6515-01-686-2401

6515NCM195832 1563160 80-821 Managed by United States NSN Created on 5 Feb 2020 Data Last Changed August
2023 NATO Update Count 1 NATO Data Quality NSN 6515-01-686-2401 (Generic Image) 1/1 1.
United States (US) 4. 6515-01-686-2401 Marketplace Restrictions Approved Sources Datasheet Management

your web browser . 1560-99-549-8835Aircraft Structural Component Bracket1560995498835 995498835 EA4-80-821
Aircraft Structural Component Bracket Approved Sources 1560-99-549-8835 Part NumberManufacturerStatusEA4-80-821

2910-99-613-4078 2910996134078 996134078 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.

2940-99-300-4840 2940993004840 993004840 EXTRACTOR,CARTRIDGE

5365-99-725-4133 5365997254133 997254133 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.