6515-01-461-5245

5310-14-227-6614 5310142276614 142276614 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

9330-15-178-8958 9330151788958 151788958 is an item consisting of plastic impregnated laminations in sheet form used as a decorative and highly stain resistant covering. it is made up by pressing together plastic impregnated laminations under high pressure and heat. a visible decorative layer is provided on one side consisting of paper, linen, wood or other materials in various colors or designs. the impregnation consists of various thermosetting resins, such as phenol formaldehyde and melamine. it is designed for bonding onto table tops, cabinets, walls and the like.

6515-01-507-3410 6515015073410 015073410 is an item having all surfaces polished, with an irregular hollow or solid cross section and a tapered leading edge, and which is designed for use in the intramedullary canal. the material from which the item is constructed must be completely corrosion resistant, inert in a living organism, and compatible with bone and tissue.

CAGE A9942 Abet Laminati Spa in Bra (Cuneo), Italy

Cranial Screw MAXILLOFACIALRNCC: 5 | RNVC: 1 | DAC: 4400.774RNCC: 3 | RNVC: 2 | DAC: 4 1 Mar 2007 6515-01-461-5245