6515-99-549-3684

| DAC: 45017462066913RNCC: 5 | RNVC: 2 | DAC: U2268-12RNCC: 5 | RNVC: 2 | DAC: 4 17 Jan 1996 6515-99-549-3684

2910-01-578-3611 2910015783611 015783611 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.

5330-01-481-0971 5330014810971 014810971 is a pliable rubber, felt, leather, or composition ring-shaped element, split or solid; with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. it may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. excludes packing with retainer.

5331-01-569-3154 5331015693154 015693154 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

4730-01-577-0300 4730015770300 015770300 is a replaceable device designed to remove solid particles from flowing liquids. the removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. it is designed to fit into a strainer, sediment (or similar cavity). it may have a reinforcement to prevent collapsing, distorting or rupturing. the degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. see also filter element, fluid.