6515-66-140-6180
Bone Surgery Case
6515661406180 661406180 301.49
Managed by Australia
NSN Created on 16 Jun 1995
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 6515-66-140-6180
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 6515-66-140-6180 5+ Documents (More...)
2030-99-791-6685 2030997916685 997916685 BOLT
1550-01-417-5665 1550014175665 014175665 is an aircraft that is not controlled by onboard personnel. control may be via signals from a remote location or autonomous via programmed mission data incorporating artificial intelligence or a combination of the two types. it may be a rotary or fixed wing aircraft, may have low detectability features and may perform various functions including, but not limited to, attack, surveillance, reconnaissance and/or intelligence gathering. excludes guided missiles.
MTV TM-9-2320-366-24P-2 Parts Manual - Volume 2 for M1083 Series Medium Tactical Vehicles. Page 282 of 961.
5310-99-459-2270 5310994592270 994592270 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5999-00-035-8694 5999000358694 000358694 is an item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. excludes items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. see also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.
Restrictions 6515-66-140-6180
End Users 6515-66-140-6180
- Australia (ZA)
Approved Sources 6515-66-140-6180
- Part Number
- Manufacturer
- Status
- 301.49
- Manufacturer
- S4485 - Mathys Robert Dr Manufacturing Co. (Active)
- Primary Buy
- Primary Buy
- 301.49
- ZJ815 - Synthes Australia Pty Ltd (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 6515-66-140-6180
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601