6515-66-135-1576

| RNVC: 2 | DAC: 4 10 Dec 1989 8940-01-125-2518 https//www.nsnlookup.com /fsg-65/fsc-6515/au 6515-66-135-1576
Cannulated Cutter 6515661351576 661351576 https//www.nsnlookup.com /fsg-59/fsc-5985/gr 5985-23-

6930-14-387-6393 6930143876393 143876393 LOT INST,CONDUI,CHA

1560-14-233-2757 1560142332757 142332757 TUYAUTERIE RIGIDE H

5310-13-103-1956 5310131031956 131031956 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5920-15-153-3948 5920151533948 151533948 is an item which consists of a panel with fuseholders mounted thereon and with terminal facilities. it is usually designed for power distribution service. may include fuses.