6505-33-104-0956

SOMAZINA 1000 MG 50 AMPOLLAS 609669 8470006096697 N06BX06 Managed by Spain NSN Created on 27 Apr 1995
RQST NE Updated Every Day 6505-33-104-0956 RQST Updated Every Day 6505-33-104-0956 RQST NE Related Documents
6505-33-104-0956 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-65/fsc-6505/es 6505-33-104-0956

-12-300-1039Plate Spacer5365123001039 123001039 2411098038 OD20564 0000745176 0609669 23310148051 609669
CRITICALITY : | HMIC : | PMIC : | EDC: | ADPEC : 5365 https//www.nsnlookup.com /fsg-65/fsc-6505/es 6505-33-104-0956
Citicolina Inyectab 6505331040956 331040956 browser . 6505-33-104-0956Citicolina Inyectab6505331040956

-9460 Part NumberManufacturerStatus796912 7408B https//www.nsnlookup.com /fsg-65/fsc-6505/es 6505-33-104-0956
Citicolina Inyectab 6505331040956 331040956 Ugello 4210150083077 150083077,7408B DIATIN 40 UE SPRAY
NumberManufacturerStatus609669 7408B 0956 is a Citicolina 0956 is a Citicolina Inyectab Approved Sources 6505-33-104-0956

5310-98-856-3728 5310988563728 988563728 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.