6350-01-392-2062

Upgrade 1390-01-396-7556Practice Mechanical Time Fuze1390013967556 013967556 12-E-27121-000-06 27121-0-325
(Active) Primary Buy RNCC 3 RNVC 2 DAC 6 27121-0-325 DEG 0KDP7 - Kidde-Fenwal, Inc.

Obsolete) Canceled/Obsolete RNCC 5 RNVC 9 DAC E SS-8-E https//www.nsnlookup.com /fsg-63/fsc-6350/us 6350-01-392-2062

4730-01-244-4666 4730012444666 012444666 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. it may have side or heel inlet(s). see also elbow, tube; and connector, multiple, fluid pressure line. excludes bend, soil pipe.

5305-66-161-0171 5305661610171 661610171 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

5305-66-161-0173 5305661610173 661610173 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.