6350-00-058-3179

4310-00-175-9128 4310001759128 001759128 is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. it is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. it may include an expander. excludes packing, preformed; retainer, oil seal; retainer, packing; ring, retaining; ring wiper; and seal ring, metal.

4330-01-063-0449 4330010630449 010630449 is an enclosed tank or vessel specifically designed to remove harmful solids, insoluble sludge and water by the force of gravity from continuous flow of contaminated oil. exclude settling tanks.

4310-01-059-4789 4310010594789 010594789 is an assembled unit consisting of a commonly mounted reciprocating compressor(s) and a prime mover(s). for items with additional equipment which extends the function of the unit beyond the delivery of compressed air or gas, see pneumatic tool and compressor outfit, or more specific names, as applicable. excludes auxiliary set, engine driven.

4330-01-190-5712 4330011905712 011905712 is a component of a filter, fluid designed to contain the filter element, fluid and attach to the head, fluid filter or the cover, access. it may have inlet and/or outlet connections, means for mounting a drain plug(s), check, relief and or by-pass valves. excludes bowl, sediment.see also strainer body, sediment.

4330-00-300-7736 4330003007736 003007736 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.