6220-14-537-7240

5950-14-343-4375 5950143434375 143434375 is a transformer consisting of one or more primary winding(s) and one or more secondary winding(s). it may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. for transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. excludes transformer (1), pulse.

2530-01-435-4349 2530014354349 014354349 is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. it may be a segment or a complete lining. it is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. it provides a friction surface for transmitting, retarding, or stopping motion. excludes lining material, friction.

26 Jul 2012 6220-14-418-1945 Aircraft Landing Light 7200RNCC: 3 | RNVC: 2 | DAC: 4 6 Aug 1987 6220-14-537-7240

4720-14-435-4349 4720144354349 144354349 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5310-99-435-4349 5310994354349 994354349 is a nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)