6220-12-322-5112

6640-22-121-6322 6640221216322 221216322 CARD

5360-15-121-6322 5360151216322 151216322 is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and spring, reinforcing, hose.

5995-01-121-6322 5995011216322 011216322

5310-13-121-6322 5310131216322 131216322 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1377-00-121-6322 1377001216322 001216322