6210-01-019-0470

Sequential Timer 106441-11RNCC: 3 | RNVC: 2 | DAC: 5106441-1RNCC: 5 | RNVC: 9 | DAC: A 20 Jan 1974 6210-01-019-0470

5310-12-126-4380 5310121264380 121264380 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5331-66-139-6218 5331661396218 661396218 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

CAGE 9145F Myoung Tel Co.,Ltd in Gyeonggi-Do, Korea, Republic Of

5330-33-105-1500 5330331051500 331051500 is an item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. the flange is usually drilled for stud or bolt mounting. item does not include the seal. excludes retainer, packing.