6210-15-123-4831

5310-01-595-7063 5310015957063 015957063 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1940-21-595-7063 1940215957063 215957063 is a watercraft powered by an internal combustion engine driving a marine propeller. this craft is easily adapted for various purposes, and may be used to replace launch, motor; boat, picket and other boats. it is designed without a rigid type cabin, and is usually protected by a stowable canvas canopy.

5310-00-595-7063 5310005957063 005957063 WASHER,RECESSED

1940-45-000-5725 1940450005725 450005725 is a watercraft powered by an internal combustion engine driving a marine propeller. this craft is easily adapted for various purposes, and may be used to replace launch, motor; boat, picket and other boats. it is designed without a rigid type cabin, and is usually protected by a stowable canvas canopy.

1940-25-160-6221 1940251606221 251606221 is a watercraft powered by an internal combustion engine driving a marine propeller. this craft is easily adapted for various purposes, and may be used to replace launch, motor; boat, picket and other boats. it is designed without a rigid type cabin, and is usually protected by a stowable canvas canopy.