6150-01-672-5875

1261103 12605853 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more
United States (US) 4. 6150-01-672-5875 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 6150-01-672-5875 RQST NE Updated Every Day 6150-01-672-5875 RQST

3688 Electrical Special Purpose Cable Assembly 4802081RNCC: 3 | RNVC: 2 | DAC: D 14 Dec 2006 6150-01-672-5875

6350-25-126-1103 6350251261103 251261103 ZENERBARRIERE

5305-12-126-1103 5305121261103 121261103 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

5310-01-126-1103 5310011261103 011261103 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.