Premium Information is available for this item - Upgrade for $1 a day
6150-01-494-8718
Electrical Load Bank
6150014948718 014948718 K990D32980
A set (bank) of electrical elements that are passive (resistive, inductive, capacitive) or active (motors, batteries). They are usually located adjacent to each other to form a consolidated set of any of these elements or any combination of them. A load bank is used to replace distributed or dispersed load elements contained in a power distribution system or electrical network for the purpose of providing a concentrated load. A load bank contains all the essential electrical characteristics necessary to terminate the circuit and functions in the same manner as the load which it is intended to replace. This description necessarily includes a bank of light bulbs or cone heating elements where energy conversion is primarily in the form of heat although visible radiant energy is the natural result of incandescent heating. Load banks are intended to cover a specific range of characteristics and normally operate at DC or at power frequencies 50, 60, or 400 Hz AC. Load banks may be uninstrumented or complete with integral instrumention and may also be furnished as skid or trailer mounted. Excludes TEST SET, ELECTRICAL (as modified). See also DUMMY LOAD, ELECTRICAL. View more Electrical Load Bank
January 2023
4
Marketplace 6150-01-494-8718
Request a Quotation from participating marketplace vendors
Related Documents 6150-01-494-8718 2+ Documents (More...)
RQST NE Updated Every Day 6150-01-494-8718 RQST Updated Every Day 6150-01-494-8718 RQST NE Related Documents
6150-01-494-8718 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-61/fsc-6150/us 6150-01-494-8718
Electrical Load Bank 6150014948718 014948718 www.nsnlookup.com /fsg-61/fsc-6150/us 6150-01-494-
Restrictions 6150-01-494-8718
IUID Required
6150-01-494-8718 is a Electrical Load Bank that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. The DCMO has forced the Demilization requirements for this item as the ICP has not collaborated. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 6150-01-494-8718
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6150-01-494-8718
- US Air Force (FGG4)
- Effective Date:
- 1 Feb 2002
Approved Sources 6150-01-494-8718
- Part Number
- Manufacturer
- Status
- K990D32980
- Manufacturer
- 01014 - Avtron Aerospace Inc (Active)
- Primary Buy
- Primary Buy
Management Data 6150-01-494-8718
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Aug 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Dec 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- L
- F
- When Exhausted Use 6150-01-388-6280
- F
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Aggregation Code:
- QC
- ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
Similar Supply Items to 6150-01-494-8718
Freight Information 6150-01-494-8718
6150-01-494-8718 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061700. A Sub NMFC of X. It has a NMFC Description of ELEC APPLIANCES/INSTRUMENTS NOI. 6150-01-494-8718 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34580 which rates the freight between FCL and LCL. 6150-01-494-8718 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 738 for ocean manifesting and military sealift. 6150-01-494-8718 is not classified as a special type of cargo when transported by water. 6150-01-494-8718 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 6150-01-494-8718
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- 30.5" H x 26.5" W x 13.3" L
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 34.7" H x 30.7" W x 20.7" L
- --
- --
- --
- Any Suitable Process
- 34.7" H x 30.7" W x 20.7" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Method 50 reusable container
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement