Premium Information is available for this item - Upgrade for $1 a day
6150-01-309-8047
Electrical Receptacle Connector
6150013098047 013098047 MIL-DTL-83513/3 M83513/03-E05C MIL-C-83513/3
Definite lengths of two or more electrical wires or similiar conductors (except cable or multiconductor cord) which are not jacketed, bound, or laced together, but which have at least one of their ends processed in a single common termination or fitting. For an item consisting of a CONNECTOR, RECEPTACLE, ELECTRICAL having termination wires of length four inches (101.6mm) or less, see CONNECTOR, RECEPTACLE, ELECTRICAL. See also CABLE ASSEMBLY (as modified); WIRING HARNESS; and LEAD, ELECTRICAL. View more Electrical Lead Assembly
November 2023
6

Marketplace 6150-01-309-8047
Request a Quotation from participating marketplace vendors
Related Documents 6150-01-309-8047 5+ Documents (More...)
M83513/03-E05C CONNECTOR,RECEPTACLE,ELECTRICAL 10 EA NS Request Quotation Updated Every Day 6150-01-309
-8047 RQST NE Updated Every Day 6150-01-309-8047 RQST Updated Every Day 6150-01-309-8047 RQST NE Related
M83513/03 MIL-C-83513/3 Definite lengths of two or more electrical wires or similiar conductors
Electrical Receptacle Connector 013098047 M83513/03-E05C MIL-C- https//www.nsnlookup.com /fsg-61
Definite lengths of two or more electrical wires or similiar conductors M83513/03-B01C MIL-C-83513/3
Electrical Receptacle Connector 013098047 M83513/03-E05C MIL-C-83513/3 Definite lengths of two

/fsg-61/fsc-6150/us
M83513/03-F04N MIL-C-83513/3 Definite lengths of two or more electrical wires or similiar conductors
Electrical Receptacle Connector 013098047 M83513/03-E05C MIL-C-83513/3 Definite lengths of two

/fsg-61/fsc-6150/us
Definite lengths of two or more electrical wires or similiar conductors M83513/03-B01C MIL-C-83513/3
Electrical Receptacle Connector 013098047 M83513/03-E05C MIL-C-83513/3 Definite lengths of two
Restrictions 6150-01-309-8047
6150-01-309-8047 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold.
Import and Export 6150-01-309-8047
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6150-01-309-8047
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
Approved Sources 6150-01-309-8047
- Part Number
- Manufacturer
- Status
- M83513/03-E05C
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-83513/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-83513/3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6150-01-309-8047
- Characteristic
- Specifications
- FIIG
- Specifications
- A077A0
- Connector Locking Method [AFRV]
- Friction
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 31 Single Mating End
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 3.0 Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Ty 2,Grade C,Cl 1 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 1.115 Inches Nominal
- Environmental Protection [ADZC]
- Moisture Resistant And Salt Water Resistant And Shock Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape
- Mating End Quantity [AFQW]
- 1
- Included Contact Quantity [CXCG]
- 31 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Material [CQZG]
- Plastic Single Mating End
- Polarization Method [AFRN]
- Mating End
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.031 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Material [CSPT]
- Metal
- Shell Surface Treatment [CSWM]
- Cadmium Or Zinc
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 0.906 Inches Nominal
- Overall Length [ABHP]
- 1.315 Inches Minimum And 1.335 Inches Maximum
- Overall Width [ABMK]
- 0.288 Inches Minimum And 0.300 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.088 Inches Minimum And 0.096 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-83513/3 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Wire Wrap Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-83513 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 6150-01-309-8047
DLA Procurement Analysis 6150-01-309-8047
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 6150-01-309-8047
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 6150-01-309-8047


















Freight Information 6150-01-309-8047
6150-01-309-8047 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 6150-01-309-8047 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 6150-01-309-8047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 6150-01-309-8047 is not classified as a special type of cargo when transported by water. 6150-01-309-8047 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 6150-01-309-8047
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 6150-01-309-8047 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: