Premium Information is available for this item - Upgrade for $1 a day
6150-01-308-2073
Electrical Receptacle Connector
6150013082073 013082073 MIL-DTL-83513/4 M83513/04-F05C MIL-C-83513/4
Definite lengths of two or more electrical wires or similiar conductors (except cable or multiconductor cord) which are not jacketed, bound, or laced together, but which have at least one of their ends processed in a single common termination or fitting. For an item consisting of a CONNECTOR, RECEPTACLE, ELECTRICAL having termination wires of length four inches (101.6mm) or less, see CONNECTOR, RECEPTACLE, ELECTRICAL. See also CABLE ASSEMBLY (as modified); WIRING HARNESS; and LEAD, ELECTRICAL. View more Electrical Lead Assembly
May 2023
4

Marketplace 6150-01-308-2073
Request a Quotation from participating marketplace vendors
Related Documents 6150-01-308-2073 5+ Documents (More...)
6150-01-308-2073 BUY NE FedMall Updated Every Day 6150-01-308-2073 RQST NE Updated Every Day 6150-01
-308-2073 RQST Updated Every Day 6150-01-308-2073 RQST NE Related Documents 6150-01-308-2073 5+ Documents

/fsg-61/fsc-6150/us
www.nsnlookup.com /fsg-61/fsc-6150/us 6150-01-407 https//www.nsnlookup.com /fsg-61/fsc-6150/us 6150-01-308-2073
Electrical Receptacle Connector 013082073 -308-2073Electrical Receptacle Connector6150013082073
Definite lengths of two or more electrical wires or similiar conductors M83513/04-C04N MIL-C-83513/4
Electrical Receptacle Connector 013082073 M83513/04-F05C MIL-C-83513/4 Definite lengths of two

/fsg-61/fsc-6150/us
M83513/04-G03C MIL-C-83513/4 Definite lengths of two or more electrical wires or similiar conductors
Electrical Receptacle Connector 013082073 M83513/04-F05C MIL-C-83513/4 Definite lengths of two

/fsg-61/fsc-6150/us
-02 289-11-20-003 094-8206-0002 154187-002C MCE-15S6E5-36.0 205053130150515 MCK-C2-B-15S6G1-36 MIL-C-83513/4
Electrical Receptacle Connector 013082073 M83513/04-F05C MIL-C-83513/4 Definite lengths of two
Restrictions 6150-01-308-2073
6150-01-308-2073 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold.
Import and Export 6150-01-308-2073
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6150-01-308-2073
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
Approved Sources 6150-01-308-2073
- Part Number
- Manufacturer
- Status
- M83513/04-F05C
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-83513/4
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-83513/4
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6150-01-308-2073
- Characteristic
- Specifications
- FIIG
- Specifications
- A077A0
- Connector Locking Method [AFRV]
- Friction
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 37 Single Mating End
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 3.0 Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Type 2,Grade C,Class 1 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 1.260 Inches Minimum And 1.270 Inches Maximum
- Environmental Protection [ADZC]
- Moisture Resistant And Salt Water Resistant And Shock Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape
- Mating End Quantity [AFQW]
- 1
- Included Contact Quantity [CXCG]
- 37 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Socket Single Mating End Single Contact Grouping
- Insert Material Document And Classification [CTKL]
- Mil-M-14,Ty Sdg-F Or Gdi-30F Mil Spec Single Material Response Single Mating End
- Insert Material [CQZG]
- Plastic Diallyl Phthalate Glass Filled Single Mating End
- Polarization Method [AFRN]
- Mating End
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.037 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Material Document And Classification [CTHH]
- Qq-A-591 Fed Spec 1St Material Response Or Qq-S-766 Fed Spec 2Nd Material Response
- Shell Material [CSPT]
- Aluminum Alloy Or Steel
- Shell Surface Treatment [CSWM]
- Nickel Or Passivate
- Shell Type [AFRT]
- Solid
- Shell Surface Treatment Document And Classification [CTBC]
- Mil-C-26070 Mil Spec 1St Treatment Response Or Qq-P-35 Fed Spec 2Nd Treatment Response
- Overall Height [ABKW]
- 0.909 Inches Minimum And 0.929 Inches Maximum
- Overall Length [ABHP]
- 1.465 Inches Minimum And 1.485 Inches Maximum
- Overall Width [ABMK]
- 0.288 Inches Minimum And 0.308 Inches Maximum
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.088 Inches Minimum And 0.096 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-83513/4 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-83513 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 6150-01-308-2073
DLA Procurement Analysis 6150-01-308-2073
Management Data 6150-01-308-2073
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 6150-01-308-2073
Freight Information 6150-01-308-2073
6150-01-308-2073 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 6150-01-308-2073 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 6150-01-308-2073 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 6150-01-308-2073 is not classified as a special type of cargo when transported by water. 6150-01-308-2073 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 6150-01-308-2073
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 6150-01-308-2073 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: