6150-14-500-7357

7025-01-334-7071 7025013347071 013347071 is an electromechanical or solid state item which accepts and systematically accepts and systematically retains digital input data in such a manner as to facilitate the rapid recovery of stored information. the item may or may not consist of disk(s) some of which are removable, hard, removable disk packs, fixed disks, or removable flexible, each surface coated with a material suceptible to spot magnetization, integral writing, a drive motor and its mechanical linkage, and data translating heads for impressing on or removing from the disk surface data in digital form. the item is a component of an electronic computer. see also, magnetic drum, data storage; core memory unit.

5310-99-454-6032 5310994546032 994546032 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

4730-01-710-8844 4730017108844 017108844 is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. it may have side inlet(s). it is used as a junction at the intersection of pipe or pipe fittings.

for $1 a day Upgrade your Account Upgrade 5315-00-453-2780Pin Straight Head5315004532780 004532780 606-16
for $1 a day Upgrade your Account Upgrade 5999-15-100-1315Tributary Unit5999151001315 151001315 612-606/16
Users 5999-15-100-1315 Italy (ZR) Approved Sources 5999-15-100-1315 Part NumberManufacturerStatus612-606/16

5365-00-242-9332 5365002429332 002429332 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).