6145-01-396-0045

Numbers Related to 8020-33-201-3310 8020-12-182 https//www.nsnlookup.com /fsg-61/fsc-6145/us 6145-01-396-0045
Electrical Special Purpose Cable 013960045 Documents 6145-01-396-0045 5+ Documents ( More... )

4720-01-201-3310 4720012013310 012013310 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5310-14-201-3310 5310142013310 142013310 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4710-15-201-3310 4710152013310 152013310 is a length of tubing, straight, or prebent to a predetermined angle, with added component(s) that forms an end connection on one or both ends. for flexible tube assemblies, see hose assembly (as modified). for items having perforations in the tubing or attachments, see tube assembly, fire extinguishing system. excludes items having integral preformed or plain ends, tube, bent (as modified), and items which are branched or forked.

3040-99-201-3310 3040992013310 992013310 is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. it is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. a pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. solid items have a bearing surface on one or both end(s) perpendicular to the axis. for items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see clamp, hub. see also bearing, sleeve; bushing, sleeve; spacer, sleeve; and coupling, shaft, rigid.