6145-01-102-1000

-308-9410Wire Wound Fixed Resistor5905123089410 https//www.nsnlookup.com /fsg-61/fsc-6145/us 6145-01-102-1000
6145011021000 011021000 design will not normally warrant their connection. https//www.nsnlookup.com

5940-66-135-9511 5940661359511 661359511 is an adapter constructed to accommodate electrically and physically a cable lug to a battery terminal whose physical design will not normally warrant their connection.

5905-12-308-9410 5905123089410 123089410 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. excludes suppressor, ignition interference.

4730-66-158-9750 4730661589750 661589750 is a collection of items which may include mender, hose; clamp (1), hose; clamp, plier; clamp (1), screw quick adjusting; hose adapters; clamp pincers and the like. it is used for temporary or permanent repair of a hose(s) connection.

5977-12-124-8165 5977121248165 121248165 is an item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. either the brush or the surface is continually moving during the transfer of energy. the brush is usually composed in part of some form of the element carbon. includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. excludes: contact, electrical; and contact assembly, electrical.