6130-43-001-2963

Supply Items Approved for CAGE 0271H Page 1 of 1 6130-43-001-2963 Power Supply B5-21RNCC: 5 | RNVC: 2

DAC: 5 11 Jan 2010 6130-43-000-0450 Power Supply ZR-510RNCC: 3 | RNVC: 2 | DAC: 2 9 Jul 2004 6130-43-001-2963

4330-12-307-7092 4330123077092 123077092 is an item designed to remove water and solid particulates from contaminated liquid fuels. it consists primarily of a tank with a removable head or a pressure vessel containing electrodes and inlet connections, filtering elements, and may contain water accumulator sump(s), alternating electric fields, necessary flow controls, gages, and accessories. it is used in military aircraft and vehicular fueling and in military pipeline systems. excludes separator, water, liquid fuel; and filter-separator, liquid fuel, trailer mounted.

5331-14-395-0672 5331143950672 143950672 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

5306-01-114-7958 5306011147958 011147958 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.