6130-12-377-7260

RNVC: 9 | DAC: 4L-2015RNCC: 5 | RNVC: 9 | DAC: 5 8 https//www.nsnlookup.com /fsg-61/fsc-6130/de 6130-12-377-7260
Battery Charger 6130123777260 123777260 6130-12-377-7260 6130123777260 123777260 is a device consisting

JavaScript in your web browser . 7720-98-202-3361Drummers Practice Pad7720982023361 982023361 LUDWIG L2015
98-202-3361 New Zealand (ZE) Approved Sources 7720-98-202-3361 Part NumberManufacturerStatusLUDWIG L2015

5935-01-497-9920 5935014979920 014979920 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

CAGE 5L201 Finishing Systems Inc in York, PA United States

5310-99-417-5328 5310994175328 994175328 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.