6115-14-521-6689

4820-99-788-7486 4820997887486 997887486 is a valve with a bolt or stem that may be mechanically actuated to two different positions by rotary or linear motion. in the first position, the valve disk is located and locked against the seat permitting no fluid flow through the valve. in the second position, one side of the valve disk is located against the seat permitting movement of the disk in a manner that will allow a flow of fluid in one direction through the valve. the valve disk may be spring loaded. it may be inline or cartridge (manifold) design. see also valve (1), lift-check and valve (1), stop-lift-check.

4820-99-545-3471 4820995453471 995453471 is a valve with a bolt or stem that may be mechanically actuated to two different positions by rotary or linear motion. in the first position, the valve disk is located and locked against the seat permitting no fluid flow through the valve. in the second position, one side of the valve disk is located against the seat permitting movement of the disk in a manner that will allow a flow of fluid in one direction through the valve. the valve disk may be spring loaded. it may be inline or cartridge (manifold) design. see also valve (1), lift-check and valve (1), stop-lift-check.

5920-12-196-4152 5920121964152 121964152 is a circuit-protecting device which provides a discharge path for abnormal surges of high potential while consuming little or no power at normal operating voltage. excludes items which absorb continuously recurring cyclic pulses. for resistors which are sensitive to voltage changes or used as elements in surge arresters, see resistor, voltage sensitive. see also absorber, overvoltage; and cutout disk, protective.

5365-00-004-7308 5365000047308 000047308 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

CAGE U3741 Norprint Labelling Systems Ltd in Boston, Lincs United Kingdom