6110-21-900-6175

in your web browser . 5340-27-011-8206Dust And Moisture Seal Protective Cap5340270118206 270118206 8C12

3040-01-497-1974 3040014971974 014971974 is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. see also arm (as modified); and lever (as modified).

3040-01-497-1984 3040014971984 014971984 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

3040-01-497-1989 3040014971989 014971989 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

5310-13-108-0477 5310131080477 131080477 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.