6105-01-036-6391

/www.nsnlookup.com /nato/nato-stock-numbers/inc Control Motor (INC 19258) DAC: 2 29 Mar 1977 6105-01-036-6391

1974 4920-01-039-8783 Paper Holddown Assembly 1013311RNCC: 3 | RNVC: 2 | DAC: 5 27 Apr 1977 6105-01-036-6391

4 7 Apr 1977 6105-01-038-0817 Control Motor 116010-000RNCC: 3 | RNVC: 2 | DAC: 2 29 Mar 1977 6105-01-036-6391

3010-12-187-3452 3010121873452 121873452 is an item specifically designed to be inserted between the driving and driven members of a flexible coupling to allow for slight misalignment of the shafts.

5310-01-187-3452 5310011873452 011873452 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.