Premium Information is available for this item - Upgrade for $1 a day
6105-00-809-4356
Motor-Tachometer Generator
6105008094356 008094356 Y844-003A 8715009-1
An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes DYNAMOTOR; and MOTOR-GENERATOR. View more Motor-Tachometer Generator
May 2023
4
Marketplace 6105-00-809-4356
Request a Quotation from participating marketplace vendors
Related Documents 6105-00-809-4356 1+ Documents (More...)
BUY NE FedMall Updated Every Day 6105-00-809-4356 RQST NE Updated Every Day 6105-00-809-4356 RQST
Updated Every Day 6105-00-809-4356 RQST NE Related Documents 6105-00-809-4356 1+ Documents ( More...
Restrictions 6105-00-809-4356
6105-00-809-4356 is a Motor-Tachometer Generator that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 6105-00-809-4356
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6105-00-809-4356
- US Air Force (FXGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FXCX
Approved Sources 6105-00-809-4356
- Part Number
- Manufacturer
- Status
- Y844-003A
- Manufacturer
- 88818 - Kearfott Corporation (Active)
- Primary Buy
- Primary Buy
- 8715009-1
- 02769 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 8715009-1
- 49671 - Lockheed Martin Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6105-00-809-4356
- Characteristic
- Specifications
- FIIG
- Specifications
- A271A0
- Calibration Speed In Rpm [BFLQ]
- 8000.0
- Calibration Voltage Output Type In Volts [BKPC]
- 22.4 Ac
- Connection Type And Voltage Rating In Volts [CWGQ]
- 115.0 Line To Neutral Single Input
- Cooling Method [BFMF]
- Nonventilated
- Control Field Voltage Type And Rating In Volts [BKPS]
- 75.5 Ac And 150.0 Ac
- Current Type [ACDC]
- Ac Input
- Excitor Type [AYHE]
- Separately Excited
- Features Provided [CBBL]
- Horizontal Mounting Position And Vertical Mounting Position
- Frequency In Hertz [FREQ]
- 400.0 Output
- Mounting Facility Type And Quantity [AXHR]
- 1 Clamp Collar And 4 Threaded Hole
- Mounting Method [AXGY]
- Clamp Ring
- Overall Length [AAJU]
- 4.422 Inches
- Inclosure Feature [ANPZ]
- Totally Inclosed
- Inclosure Specification [BKPQ]
- Commercial
- Length Of Shaft From Housing [CWCS]
- 0.500 Inches Single End
- Rotor Speed Rating In Rpm [CWFX]
- 9000.0 Single No Load
- Shaft Diameter [ABWV]
- 0.2541 Inches Nominal Single End
- Shaft End Characteristic [CWHZ]
- A14 Single Style Single End
- Overall Width [AAJV]
- 2.250 Inches
- Phase [FAAZ]
- Two Input
- Torque Rating And Type [BKPH]
- 9.0 Inch-Ounces Stalled
- Spline Minor Diameter [AAUH]
- 0.2292 Inches Nominal Single End
- Spline Quantity [ABSA]
- 22 Single End
- Spline Length [AXFH]
- 0.5000 Inches Nominal Single End
- Terminal Type And Quantity [TTQY]
- 12 Wire Lead
DLA Procurement Analysis 6105-00-809-4356
Management Data 6105-00-809-4356
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 6105-00-809-4356
Freight Information 6105-00-809-4356
6105-00-809-4356 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 6105-00-809-4356 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 6105-00-809-4356 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 6105-00-809-4356 is not classified as a special type of cargo when transported by water. 6105-00-809-4356 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 6105-00-809-4356 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: