Premium Information is available for this item - Upgrade for $1 a day
6105-00-635-5626
Control Motor
6105006355626 006355626 10CM-9905-D C45-5051-07-00 5051-07 1116-2
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT. View more Control Motor
May 2023
12
Marketplace 6105-00-635-5626
Request a Quotation from participating marketplace vendors
Related Documents 6105-00-635-5626 5+ Documents (More...)
AssyUOMTechnical DocumentQuantative ExpressionDefense Logistics Agency (DS)IZDiscontinued-Use 6105-00-635-5626
Vendor Details... 505107 MOTOR,CONTROL RQST NS Request Quotation Subscribe to View Vendor Details... 10CM-9905-D
(241)A0069TAP-5051/07 A deformable material which prevents the passage of matter through the joint
Netherlands (ZN) Italy (ZR) Norway (ZT) Approved Sources 5330-15-200-5174 Part NumberManufacturerStatusTAP-5051/07
/fsg-59/fsc-5940/uk
Part NumberManufacturerStatus22-01-1073 U1613 - Molex Uk (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 5051-07
Restrictions 6105-00-635-5626
6105-00-635-5626 is a Control Motor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 6105-00-635-5626
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6105-00-635-5626
- US Air Force (FXGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FXCX
Approved Sources 6105-00-635-5626
- Part Number
- Manufacturer
- Status
- 10CM-9905-D
- Manufacturer
- 51761 - Cda Intercorp Llc (Active)
- Primary Buy
- Primary Buy
- C45-5051-07-00
- 58880 - Meggitt (New Hampshire), Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5051-07
- 58880 - Meggitt (New Hampshire), Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1116-2
- 97485 - Avien Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6105-00-635-5626
- Characteristic
- Specifications
- FIIG
- Specifications
- A271A0
- Connection Type And Voltage Rating In Volts [CWGQ]
- 18.0 Line To Neutral Single Input
- Control Field Voltage Type And Rating In Volts [BKPS]
- 18.0 Ac
- Control Field Winding Type [BFML]
- Two Windings, Parallel Connected
- Current Type [ACDC]
- Ac Input
- Frequency In Hertz [FREQ]
- 400.0 Input
- Mounting Facility Circle Diameter [CWFQ]
- 1.140 Inches
- Mounting Facility Type And Quantity [AXHR]
- 2 Unthreaded Hole
- Mounting Method [AXGY]
- End Bell
- Overall Length [AAJU]
- 1.531 Inches
- Length Of Shaft From Housing [CWCS]
- 0.175 Inches Single End
- Rotor Speed Rating In Rpm [CWFX]
- 10000.0 Single No Load
- Shaft Diameter [ABWV]
- 0.2810 Inches Nominal Single End
- Shaft End Characteristic [CWHZ]
- A1 Single Style Single End
- Overall Height [AAJT]
- 1.375 Inches
- Overall Width [AAJV]
- 0.937 Inches
- Phase [FAAZ]
- Single Input
- Torque Rating And Type [BKPH]
- 0.1 Inch-Ounces Stalled
- Temp Rating [CWDY]
- -65.0 Operating Deg Celsius And 125.0 Operating Deg Celsius
DLA Procurement Analysis 6105-00-635-5626
Management Data 6105-00-635-5626
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 6105-00-635-5626
Freight Information 6105-00-635-5626
6105-00-635-5626 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 6105-00-635-5626 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 6105-00-635-5626 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 6105-00-635-5626 is not classified as a special type of cargo when transported by water. 6105-00-635-5626 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 6105-00-635-5626 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: