Premium Information is available for this item - Upgrade for $1 a day
6105-00-465-6162
Alternating Current Motor
6105004656162 004656162 5K48NG626X
A motor which is designed for operation from an alternating current source. See also MOTOR, CONTROL. View more Alternating Current Motor
May 2023
4
Marketplace 6105-00-465-6162
Request a Quotation from participating marketplace vendors
Related Documents 6105-00-465-6162 1+ Documents (More...)
Restrictions 6105-00-465-6162
6105-00-465-6162 is a Alternating Current Motor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 6105-00-465-6162
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
Approved Sources 6105-00-465-6162
- Part Number
- Manufacturer
- Status
- 5K48NG626X
- Manufacturer
- 03510 - General Electric Co (Active)
- Primary Buy
- Primary Buy
Datasheet 6105-00-465-6162
- Characteristic
- Specifications
- FIIG
- Specifications
- A271A0
- Duty Cycle [AKPS]
- Continuous
- Connection Type And Voltage Rating In Volts [CWGQ]
- 230.0 Line To Neutral First Multiple Input Or 460.0 Line To Neutral Second Multiple Input
- Cooling Method [BFMF]
- Self-Ventilated
- Features Provided [CBBL]
- Thermal Protective Device And Horizontal Mounting Position And Vertical Mounting Position
- Frame Size Designation [CNMM]
- 56
- Frequency In Hertz [FREQ]
- 60.0 Input
- Mounting Facility Type And Quantity [AXHR]
- 4 Slot
- Mounting Method [AXGY]
- Resilient Cradle
- Nominal Center To Center Distance Between Mounting Facilities Parallel To Length [CWDT]
- 2.760 Inches
- Nominal Center To Center Distance Between Mounting Facilities Parallel To Width [CWFY]
- 4.880 Inches
- Overall Length [AAJU]
- 12.630 Inches
- Inclosure Feature [ANPZ]
- Dripproof Protected-15 Deg
- Inclosure Specification [BKPQ]
- Nema
- Keyway Width [ABRR]
- 0.1880 Inches Nominal Single End
- Keyway Depth [ABRV]
- 0.0940 Inches Nominal Single End
- Keyway Length [AFYS]
- 1.3800 Inches Nominal Single End
- Length Of Shaft From Housing [CWCS]
- 1.880 Inches Single End
- Power Rating [CNXS]
- 0.7500 Horsepower Output
- Rotor Speed Rating In Rpm [CWFX]
- 3450.0 Single Full Load
- Shaft Center To Mounting Surface Distance [CWDM]
- 3.000 Inches Single End
- Shaft End Characteristic [CWHZ]
- A9 Single Style Single End
- Shaft Diameter [ABWV]
- 0.6250 Inches Nominal Single End
- Shaft Rotation Direction [AKCT]
- Clockwise Single End Or Counterclockwise Single End
- Overall Height [AAJT]
- 6.330 Inches
- Overall Width [AAJV]
- 6.500 Inches
- Phase [FAAZ]
- Three Input
- Winding Type [AXCP]
- Induction-Squirrel Cage
- Terminal Type And Quantity [TTQY]
- 9 Wire Lead
DLA Procurement Analysis 6105-00-465-6162
Management Data 6105-00-465-6162
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 6105-00-465-6162
Freight Information 6105-00-465-6162
6105-00-465-6162 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 6105-00-465-6162 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 6105-00-465-6162 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 6105-00-465-6162 is not classified as a special type of cargo when transported by water. 6105-00-465-6162 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 6105-00-465-6162 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: