What is Federal Supply Class 6105?

FSC 6105 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 6105) in the USA for supply items codified in the category of Motors, Electrical.

What is NATO Supply Classification Class 6105?

NSC 6105 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 6105 in the USA) for supply items codified in the category of Motors, Electrical.

Which Federal Supply Group is FSC 6105 in?

FSC 6105 is in Federal Supply Group (FSG) 61 which contains Electric Wire, and Power and Distribution Equipment.

Which NATO Supply Classification Group is NSC 6105 in?

NSC 6105is in NATO Supply Classification Group (NSG) 61 which contains Electric Wire, and Power and Distribution Equipment.

What is an Electric Motor Assembly?

An Electric Motor Assembly (MOTOR ASSEMBLY,ELECTRIC) is two or more electrical motors on a common mounting or mounted on each other. Do not use this name for single motors mounted with common motor accessories such as pulleys, gear reduction units, starting mechanism, or for one or more motors mounted together with components that are not motor accessories. Excludes assemblies consisting of two or more synchro components.

What is a Motor Armature?

A Motor Armature (ARMATURE,MOTOR) is an armature which is a part of a motor. See also ROTOR, MOTOR.

What is a Motor Rotor?

A Motor Rotor (ROTOR,MOTOR) is a rotor which is a part of an alternating current motor. See also ARMATURE (1), MOTOR.

What is an Alternating Current Motor?

An Alternating Current Motor (MOTOR,ALTERNATING CURRENT) is a motor which is designed for operation from an alternating current source. See also MOTOR, CONTROL.

What is an Electric Motor Support?

An Electric Motor Support (SUPPORT,ELECTRIC MOTOR) is an item specifically designed to mount an electric motor to a given surface, and restrain the movement of the motor produced by torque factors. It may be fabricated from ferrous/non-ferrous castings, and/or welded pieces.

What is a Commutator?

A Commutator is a cylindrical arrangement of alternate segments of electrical conductive and insulating materials on a supporting structure, which provides an exposed surface for establishing electrical continuity between individual armature coils and current collecting brushes.

What is an Electrical Rotating Equipment End Bell?

An Electrical Rotating Equipment End Bell (END BELL,ELECTRICAL ROTATING EQUIPMENT) is an item designed to support and position an armature or rotor when installed in a motor, generator or similar electrical rotating equipment. It may include items such as bearings, brushes, brush holders, oilers.

What is a Motor Field Winding?

A Motor Field Winding (WINDING,MOTOR FIELD) is a winding which is a maintenance part for an electric motor.

What is a Direct Current Motor?

A Direct Current Motor (MOTOR,DIRECT CURRENT) is a motor which is designed for operation from a direct current source. Excludes MOTOR, ENGINE STARTER, ELECTRICAL. See also MOTOR, CONTROL.

What is an Universal Motor?

An Universal Motor (MOTOR,UNIVERSAL) is a motor which is designed for operation from either a single phase alternating current or direct current source.

What is a Control Motor?

A Control Motor (MOTOR,CONTROL) is a motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.

What is a Motor-Tachometer Generator?

A Motor-Tachometer Generator is an item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes DYNAMOTOR; and MOTOR-GENERATOR.

What is a Stepping Motor?

A Stepping Motor (MOTOR,STEPPING) is a reversible brushless motor, the rotor of which rotates in discrete angular increments when its stator windings are energized in a programmed manner. Rotation occurs because of the magnetic attraction between the rotor poles and the sequentially energized stator phases. The rotor has no electrical windings but rather salient or magnetized poles.

What is a Torque Motor?

A Torque Motor (MOTOR,TORQUE) is a motor whose rotating member is limited in travel to less than one mechanical revolution or travel at a speed much lower than a conventional motor. It is designed to convert an electrical energy input into a fast-responding mechanical motion output in the form of a constant torque. It does not include gear box(es) or gear train(s), commutators, brushes, or slip rings. The output torque may be exerted through a rotational travel movement or while operating in a continuously stalled or intermittently stalled condition. Excludes ELECTROMAGNETIC ACTUATOR; MOTOR, CONTROL; and SOLENOID, ELECTRICAL.

Motors, Electrical - United Kingdom (UK)

Federal Supply Class (FSC): 6105

NATO Supply Classification Class (NSC): 6105

Federal Supply Group (FSG): 61 Electric Wire, and Power and Distribution Equipment

NATO Supply Classification Group (NSG): 61 Electric Wire, and Power and Distribution Equipment

Items Managed by United Kingdom (UK) - NCB is 99

Page 15 of 33

NSN Format for Motors, Electrical
Codified by United Kingdom

61	05	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 6105 is a classification within NATO Supply Group 61, which is dedicated to Electric Wire, And Power And Distribution Equipment.

NATO Supply Class 6105 specifically focuses on Motors, Electrical. This class includes various types of electrical motors used for different applications. These motors are designed to convert electrical energy into mechanical energy, enabling the operation of various machinery and equipment.

Motors in this class can be categorized based on their power source, size, and specific functionality. They can be powered by AC (alternating current) or DC (direct current) electrical sources. The size of the motors can vary from small, portable motors to large, industrial-sized motors.

Motors in this class are used in a wide range of applications, including but not limited to:

1. Industrial machinery: Motors are commonly used in industrial machinery such as pumps, compressors, conveyor systems, and manufacturing equipment.

2. Automotive industry: Motors are essential components in vehicles, powering systems such as windshield wipers, power windows, and electric power steering.

3. HVAC systems: Motors are used in heating, ventilation, and air conditioning (HVAC) systems to drive fans and blowers.

4. Appliances: Motors are found in various household appliances such as refrigerators, washing machines, and vacuum cleaners.

5. Renewable energy systems: Motors are used in renewable energy systems like wind turbines and solar tracking systems to convert energy into electricity.

It is important to note that NATO Supply Class 6105 is just one of the many classes within NATO Supply Group 61. This group encompasses a wide range of electric wire, power, and distribution equipment used in military and civilian applications.

If you need more specific information about a particular type of motor or any other equipment within NATO Supply Group 61, please let me know.

Frequently Asked Questions(FAQ) for Federal Supply Class 6105

Supply Items Included in Federal Supply Class 6105

Stock Items From Supply Class 6105 Page 15 of 33