6105-40-000-6681

like. see also coupling, tube and nipple, tube. https//www.nsnlookup.com /fsg-61/fsc-6105/sk 6105-40-000-6681
Direct Current Motor 6105400006681 400006681 6105-40-000-6681 6105400006681 400006681 is a motor

2006 6105-40-001-1227 Direct Current Motor UF 101-16.3000RNCC: 3 | RNVC: 2 | DAC: 2 27 May 2011 6105-40-000-6681
Direct Current Motor D25-ARNCC: 5 | RNVC: 2 | DAC: 3 3 Dec 2007 6105-40-000-6680 Direct Current

19482) 1993 1290-40-000-1033 https//www.nsnlookup.com /cage Artem (CAGE Code SAM00) 3 Dec 2007 6105-40-000-6681

27 Nov 2007 6105-40-000-6679 Direct Current Motor UT-6DMRNCC: 3 | RNVC: 2 | DAC: 3 3 Dec 2007 6105-40-000-6681

5306-01-024-2461 5306010242461 010242461 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.