6105-12-333-4354

/www.nsnlookup.com /cage Tallygenicom Computerdrucker Gmbh (CAGE Code C2651) : 5 15 Dec 1993 6105-12-333-4354

Jan 1994 5340-12-333-4086 Manual Control Lever 050071RNCC: 3 | RNVC: 2 | DAC: 5 15 Dec 1993 6105-12-333-4354

2920-33-153-9696 2920331539696 331539696 is a stator which is a maintenance part of a generator, engine accessory.

4920-00-957-8125 4920009578125 009578125 SUPPORT,LEG,CRADLE

5365-12-325-6082 5365123256082 123256082 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.