Premium Information is available for this item - Upgrade for $1 a day
5999-01-476-9566
Electrical-Electronic Component Mounting Pad
5999014769566 014769566 81915-1
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
May 2023
3
Marketplace 5999-01-476-9566
Request a Quotation from participating marketplace vendors
Related Documents 5999-01-476-9566 4+ Documents (More...)
Updated Every Day 5999-01-476-9566 RQST NE Related Documents 5999-01-476-9566 4+ Documents ( More...
RQST NE Updated Every Day 5999-01-476-9566 RQST Updated Every Day 5999-01-476-9566 RQST NE Related
5999014769566 014769566,81915-1 Account Upgrade 5999-01-476-9566Electrical-Electronic Component
Mounting Pad5999014769566 014769566 81915 us 5999-01-476-9566 https//www.nsnlookup.com /fsg-53/fsc-5330
-5998/uk 5998-99-219-8896 Printed Circuit Board https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-476-9566
5999014769566 014769566,81915-1 5999-01-476-9566Electrical-Electronic Component https//www.nsnlookup.com
5999014769566 014769566,81915-1 Account Upgrade 5999-01-476-9566Electrical-Electronic Component
Mounting Pad5999014769566 014769566 81915 Eccentric Head Bolt 5306142075532142075532 enable JavaScript
Restrictions 5999-01-476-9566
5999-01-476-9566 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-476-9566
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-476-9566
- US Navy (N9BN)
- Effective Date:
- 1 Jun 2007
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- KE
Approved Sources 5999-01-476-9566
- Part Number
- Manufacturer
- Status
- 81915-1
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
- 81915-1
- 07148 - United Technologies Corp Hamilton (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5999-01-476-9566
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- End Item Identification [AGAV]
- Mark Iii Helicopters (Sh-60B)
- Body Style [AAQL]
- Rectangular
- Criticality Code Justification [CRTL]
- Agav
- Material [MATT]
- Plastic Diallyl Phthalate
- Mounting Facility Type And Quantity [AXHR]
- 2 Unthreaded Hole Single Mounting Facility
- Overall Height [ABKW]
- 0.005 Inches Minimum And 0.010 Inches Maximum
- Overall Length [ABHP]
- 0.840 Inches Nominal
- Overall Width [ABMK]
- 0.400 Inches Nominal
- Special Features [FEAT]
- Optional Corner Can Be Rounded Or Square
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.035 Inches Nominal All Mounting Facilities
DLA Procurement Analysis 5999-01-476-9566
Management Data 5999-01-476-9566
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- VH
- MARK III Helicopters (SH-60B)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5999-01-476-9566
Freight Information 5999-01-476-9566
5999-01-476-9566 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-476-9566 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-476-9566 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-476-9566 is not classified as a special type of cargo when transported by water. 5999-01-476-9566 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5999-01-476-9566 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: