Premium Information is available for this item - Upgrade for $1 a day
5999-01-445-4082
Electrical-Electronic Component Mounting Pad
5999014454082 014454082 A-A-55485/6 A-55485/06-017N M38527/06-017N
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
May 2023
4
Marketplace 5999-01-445-4082
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5999-01-445-4082 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5999- 59/fsc-5999/us 5999-01-445-40825999014454082 014454082,A-A
-043N ,A-A-55485 /6 013374936,A-A-55485/6 -043N A-A-55485 ,A-A-55485/6 -01-411-2852 5999014112852 /06
A-A-55485/6 A-55485/06-043N A-A-55485/06 ,A-A-55485/6 5999014454082014454082,A-A-55485/6 5999013374936013374936
012928840,A-A-55485/6 M38527/06-043N MIL-M https 5999014112852 014112852,A-A-55485/6 A-55485 /06-043N
013374936,A-A-55485/6 -043N A-A-55485 ,A-A-55485/6 -01-411-2852 5999014112852 /06-009N MIL-M https /fsc
5999014454082 014454082,A-A-55485/6 59/fsc-5999/us 5999-01-411-28525999014112852014112852,A-A-55485
( More... ) https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-200-90045999012009004012009004,A-A-55485/6
5999014454082 014454082,A-A-55485/6 ,A-A-55485/6 5999014454082014454082,A-A-55485/6 5999013374936013374936
5999014454082 014454082,A-A-55485/6 /fsg-59/fsc-5999/us 5999-01-337-4936 5999013374936 013374936
,A-A-55485/6 A-55485/06-043N A-A-55485/06 ,A-A-55485/6 5999014454082014454082,A-A-55485/6 5999013374936013374936
Restrictions 5999-01-445-4082
5999-01-445-4082 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-445-4082
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-445-4082
- US Navy (N9BN)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTHXHD
Approved Sources 5999-01-445-4082
- Part Number
- Manufacturer
- Status
- A-55485/06-017N
- Manufacturer
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- A-A-55485/6
- 58536 - Federal Commercial Item Description (Active)
- Incomplete Standard
- Incomplete Standard
- M38527/06-017N
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5999-01-445-4082
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Accommodated Device Mounting Hole Pattern Style [CZGX]
- Two Hole - 0.238 Inch
- Accommodated Device Mounting Hole Quantity [CZGY]
- 2
- Body Style [AAQL]
- Oval
- Material [MATT]
- Plastic Polyamide
- Mounting Facility Type And Quantity [AXHR]
- 2 Unthreaded Hole All Mounting Facilities
- Special Features [FEAT]
- Distance Between Mounting Hole Center 0.250
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.045 Inches Nominal All Mounting Facilities
- Specification/Standard Data [ZZZK]
- 58536-A-A55485/6 Government Specification
- Test Data Document [TEST]
- 58536-A-A-55485 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5999-01-445-4082
Management Data 5999-01-445-4082
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5999-01-445-4082
Freight Information 5999-01-445-4082
5999-01-445-4082 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-445-4082 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-445-4082 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-445-4082 is not classified as a special type of cargo when transported by water. 5999-01-445-4082 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-445-4082
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 5
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-445-4082 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: