Premium Information is available for this item - Upgrade for $1 a day
5999-01-428-2676
Electrical-Electronic Component Mounting Pad
5999014282676 014282676 211926
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
May 2023
1
Marketplace 5999-01-428-2676
Request a Quotation from participating marketplace vendors
Related Documents 5999-01-428-2676 4+ Documents (More...)
United States (US) 4. 5999-01-428-2676 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5999-01-428-2676 RQST NE Updated Every Day 5999-01-428-2676 RQST
WASHER,FLAT 3 EA NS Request Quotation Subscribe to View Vendor Details... 211926 WASHER,FLAT 1 EA NS
5305-12-379-4020 Machine Screw 5305123794020 123794020 01-428-26765999014282676 014282676,211926 211926
211926 A nonvehicular device designed to increase, decrease, and/or reverse the rotation between the
5999014282676 014282676,211926 Account Upgrade 5999-01-428-2676Electrical-Electronic Component
211926 A nonvehicular device designed to increase, decrease, and/or reverse the rotation between the
WASHER,FLAT 3 EA NS Request Quotation Subscribe to View Vendor Details... 211926 WASHER,FLAT 1 EA NS
Restrictions 5999-01-428-2676
5999-01-428-2676 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-428-2676
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-428-2676
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
Approved Sources 5999-01-428-2676
- Part Number
- Manufacturer
- Status
- 211926
- Manufacturer
- 21877 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5999-01-428-2676
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Body Style [AAQL]
- Rectangular
- Overall Length [ABHP]
- 3.560 Inches Nominal
- Overall Height [ABKW]
- 0.400 Inches Nominal
- Overall Width [ABMK]
- 0.310 Inches Nominal
- Material [MATT]
- Plastic Polyamide
- Material Document And Classification [MDCL]
- Mil-I-24768/9-S-17, Type Npg Mil Spec Single Material Response
- Accommodated Device Mounting Hole Quantity [CZGY]
- 2
- Mounting Facility Type And Quantity [AXHR]
- 2 Threaded Hole All Mounting Facilities
- Thread Series Designator [THSD]
- Unc Single Mounting Facility
- Nominal Thread Size [CQJX]
- 2.000 Inches Single Mounting Facility
- Thread Tolerance Class [CTTC]
- 2B Internal Single Mounting Facility
- Thread Quantity Per Inch [CMLP]
- 40 Single Mounting Facility
- Special Features [FEAT]
- Item Is Rectangular With Both Ends Being 0.400 Inches High, Middle Section Being 0.120 Inches High. Two Threaded Holes, And Eight Unthreaded 0.025 Inch (Nominal) Holes Along Length.
- End Item Identification [AGAV]
- An/Sys-2
DLA Procurement Analysis 5999-01-428-2676
Management Data 5999-01-428-2676
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5999-01-428-2676
Freight Information 5999-01-428-2676
5999-01-428-2676 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-428-2676 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-428-2676 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-428-2676 is not classified as a special type of cargo when transported by water. 5999-01-428-2676 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-428-2676
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 5.0" H x 2.0" W x 2.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 5.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5999-01-428-2676 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: