Premium Information is available for this item - Upgrade for $1 a day
5999-01-362-3702
Electrical-Electronic Component Mounting Pad
5999013623702 013623702 MIL-M-38527/8 M38527/08-108R M38527/8-108R
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
May 2023
6
Marketplace 5999-01-362-3702
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5999-01-362-3702 5+ Documents (More...)
/us 5999-01-096-9849 5999010969849 010969849,MIL-M-38527/8 ,MIL-M-38527/8 5999013747696013747696 ,MIL-M
,MIL-M https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999 -01-362-3702 5999013623702013623702,MIL-M-38527
MIL-M ,MIL-M-38527/8 ,MIL-M-38527/8 5999013558781013558781 fsg-59/fsc-5970/us 5970-01-231-3503 Plate
308-0370 Disk Insulator 5970013080370 013080370 MIL-M ,MIL-M-38527/8 ,MIL-M-38527/8 5999013558781013558781
5999013623702 013623702,MIL-M-38527/8 5999010969849010969849,MIL-M-38527/8 - ,MIL-M-38527/8 5999013558781013558781
,MIL-M-38527/8 5999010969849010969849 MIL-M ,MIL-M-38527/8 5999013558781013558781 MIL-M-38527/8 5999013558781013558781
010969849,MIL-M-38527/8 ,MIL-M-38527/8 5999013747696013747696 ,MIL-M /8 5999010969849010969849,MIL-M
-38527/8 - ,MIL-M-38527/8 5999013558781013558781 ,MIL-M-38527/8 5999010969849010969849 ,MIL-M-38527/8
-01-362-3702 5999013623702 013623702,MIL-M-38527/8 - ,MIL-M-38527/8 5999013558781013558781,MIL-M-38527
5999011739541011739541,MIL-M-38527/8 5999011739541011739541,MIL-M-38527/8 ,MIL-M-38527/8 5999013558781013558781
Restrictions 5999-01-362-3702
5999-01-362-3702 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-362-3702
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-362-3702
- US Air Force (FXGG)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- FXCX
Approved Sources 5999-01-362-3702
- Part Number
- Manufacturer
- Status
- M38527/08-108R
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-M-38527/8
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- M38527/8-108R
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5999-01-362-3702
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Fifth Hole Spacing [CRYN]
- 0.215 Inches Nominal
- First End Radius [CQBH]
- 0.232 Inches Nominal
- First Hole Spacing [CQSH]
- 0.232 Inches Nominal
- First Hole Diameter [ABRC]
- 0.140 Inches Nominal
- First Side Radius [CRWK]
- 0.570 Inches Nominal
- Fourth Hole Spacing [CQDL]
- 0.430 Inches Nominal
- Material And Location [MTLC]
- Overall Plastic,Polyimide,Glass Cloth Reinforced,Mil-M-38527/8
- Second Hole Diameter [ABRD]
- 0.046 Inches Nominal
- Second Hole Spacing [CRKY]
- 0.072 Inches Nominal
- Overall Height [ABKW]
- 0.008 Inches Minimum And 0.012 Inches Maximum
- Overall Length [ABHP]
- 1.650 Inches Nominal
- Overall Width [ABMK]
- 1.140 Inches Nominal
- Style Designator [STYL]
- Flat, Diamond
- Third Hole Spacing [CRTB]
- 1.187 Inches Nominal
Weapon Systems (WSDC) 5999-01-362-3702
DLA Procurement Analysis 5999-01-362-3702
Management Data 5999-01-362-3702
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5999-01-362-3702
Freight Information 5999-01-362-3702
5999-01-362-3702 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 103300. A Sub NMFC of Z. It has a NMFC Description of INSULATING MATERIAL NOI. 5999-01-362-3702 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53360 which rates the freight between FCL and LCL. 5999-01-362-3702 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-362-3702 is not classified as a special type of cargo when transported by water. 5999-01-362-3702 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5999-01-362-3702 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: