Premium Information is available for this item - Upgrade for $1 a day
5999-01-319-1841
Electrical-Electronic Component Mounting Pad
5999013191841 013191841 RC-TO5140-8V 2540938-1 RC-T05140-8C
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
June 2023
9
Marketplace 5999-01-319-1841
Request a Quotation from participating marketplace vendors
Related Documents 5999-01-319-1841 4+ Documents (More...)
5999013191841 013191841,RC-TO5140-8V Documents 5999-01-319-1841 3+ Documents ( More... ) https/
Navy (DN)NZDiscontinued-Use 5999-01-319-1841Defense Logistics Agency (DS)IZDiscontinued-Use 5999-01-319-1841
5999013191841 013191841,RC-TO5140-8V (CAGE Code 60225) 1990 5999-01-319-3049 Electronic Components
Restrictions 5999-01-319-1841
5999-01-319-1841 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-319-1841
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-319-1841
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Feb 2004
- Australia (ZA01)
- Effective Date:
- 22 Jul 2002
- Denmark (ZS01)
- Effective Date:
- 1 Mar 1995
- Norway (ZT01)
- Effective Date:
- 1 Jan 1995
Approved Sources 5999-01-319-1841
- Part Number
- Manufacturer
- Status
- 2540938-1
- Manufacturer
- 10001 - Navair And Navsea Managed (Active)
- Primary Buy
- Primary Buy
- RC-TO5140-8V
- 19080 - Robison Electronics Inc (Active)
- Secondary Buy
- Secondary Buy
- 2540938-1
- 60225 - L3 Technologies, Inc. (Active)
- Secondary Buy
- Secondary Buy
- RC-T05140-8C
- 19080 - Robison Electronics Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5999-01-319-1841
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Body Style [AAQL]
- Disk
- Overall Height [ABKW]
- 0.140 Inches Nominal
- Overall Diameter [ADAV]
- 0.480 Inches Nominal
- Color [HUES]
- White
- Material [MATT]
- Plastic Mineral Filled
- Accommodated Device Mounting Hole Pattern Style [CZGX]
- Eight Hole - 0.400 Inch
- Accommodated Device Mounting Hole Quantity [CZGY]
- 8
- Mounting Facility Type And Quantity [AXHR]
- 8 Unthreaded Hole Single Mounting Facility
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.030 Inches Nominal Single Mounting Facility
Weapon Systems (WSDC) 5999-01-319-1841
DLA Procurement Analysis 5999-01-319-1841
Management Data 5999-01-319-1841
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5999-01-319-1841
Freight Information 5999-01-319-1841
5999-01-319-1841 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-319-1841 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-319-1841 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-319-1841 is not classified as a special type of cargo when transported by water. 5999-01-319-1841 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-319-1841
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-319-1841 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: