Premium Information is available for this item - Upgrade for $1 a day
5999-01-198-7079
Electrical-Electronic Component Mounting Pad
5999011987079 011987079 MIL-M-38527/7 M38527/07-007D
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
November 2023
7
Marketplace 5999-01-198-7079
Request a Quotation from participating marketplace vendors
Related Documents 5999-01-198-7079 5+ Documents (More...)
,MIL-M-38527/7 5999015264461015264461,MIL-M-38527/7 5999013558155013558155 ,MIL-M -38527/7 https/ -198
, MIL-M-38527/7 ,MIL-M-38527/7 5999015264461015264461,MIL-M-38527/ 7 /fsg- ,MIL-M-38527/7 -198-7079 5999011987079011987079
011987079,MIL-M-38527/7 5999015264461015264461,MIL-M-38527/7 /fsg- ,MIL-M-38527/7 -198-7079 5999011987079011987079
MIL-M-38527/7 5999015264461015264461,MIL-M-38527/7 /fsg- ,MIL-M-38527/7 -198-7079 5999011987079 011987079
https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-198-7079 5999011987079 011987079,MIL-M-38527/7
5999015264461015264461,MIL-M-38527/7 /fsg- ,MIL-M-38527/7 -198-7079 5999011987079011987079 ,MIL-M- ,MIL-M
01-526-4461 5999015264461015264461,MIL-M-38527/7 ,MIL-M-38527/7 5999015264461015264461,MIL-M-38527/
7 https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-355-81555999013558155013558155,MIL-M-38527/7 011987079
5999011987079 011987079,MIL-M-38527/7 5999015264461015264461,MIL-M-38527/7 /fsg- https//www.nsnlookup.com
,MIL-M-38527/7 https//www.nsnlookup.com ,MIL-M-38527/7 //www.nsnlookup.com / 5999015264461015264461,MIL-M
Restrictions 5999-01-198-7079
5999-01-198-7079 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5999-01-198-7079
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-198-7079
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
- Spain (YB01)
- Effective Date:
- 1 Jun 1999
Approved Sources 5999-01-198-7079
- Part Number
- Manufacturer
- Status
- M38527/07-007D
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-M-38527/7
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5999-01-198-7079
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Material [MATT]
- Plastic Diallyl Phthalate
- Mounting Facility Type And Quantity [AXHR]
- 1 Friction Single Mounting Facility
- Overall Height [ABKW]
- 0.078 Inches Nominal
- Overall Length [ABHP]
- 0.375 Inches Nominal
- Overall Width [ABMK]
- 0.250 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81349-Mil-M-38527/7 Government Specification
- Test Data Document [TEST]
- 81349-Mil-M-38527 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5999-01-198-7079
DLA Procurement Analysis 5999-01-198-7079
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5999-01-198-7079
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 5999-01-198-7079
Freight Information 5999-01-198-7079
5999-01-198-7079 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-198-7079 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-198-7079 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-198-7079 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5999-01-198-7079 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-198-7079
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 5
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-198-7079 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: