Premium Information is available for this item - Upgrade for $1 a day
5999-01-198-7076
Electrical-Electronic Component Mounting Pad
5999011987076 011987076 A-A-55485/5 3249619 715851-1 A55485/05-012D A-55485/05-012D M38527/05-012D A-A-55485/05 MIL-M-38527/5
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
November 2023
27
Marketplace 5999-01-198-7076
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5999-01-198-7076 5+ Documents (More...)
BUY NE Updated Every Day 5999-01-198-7076 RQST NE Updated Every Day 5999-01-198-7076 RQST Updated
Every Day 5999-01-198-7076 RQST NE Related Documents 5999-01-198-7076 5+ Documents ( More... ) https
5999011987076 011987076,,A-A-55485/5,3249619 A-55485/05-012D M38527/05-012D A-A-55485/05 MIL-M-
012D MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPONENT 7 EA NS Request Quotation Subscribe to View 5999-01-198-7076
-162-4244 RQST NE Related Documents 5999-01-162 https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-198-7076
5999011987076 011987076,,A-A-55485/5,3249619 Request Quotation Subscribe to View 5999-01-198-7076
5999011987076 011987076,,A-A-55485/5,3249619 01-198-7076Electrical-Electronic Component Mounting
Pad5999011987076 011987076 A-A-55485/5 3249619 715851 Request Quotation Subscribe to View 5999-01-198
5999011987076 011987076,,A-A-55485/5,3249619 Upgrade 5999-01-198-7076Electrical-Electronic Component
Mounting Pad5999011987076 011987076 A-A-55485/5 3249619 9807Electrical-Electronic Component Mounting
Restrictions 5999-01-198-7076
5999-01-198-7076 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-198-7076
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-198-7076
- US Army (A918)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- AZCTCLBF
- MOE Rule:
- BGX1
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- BTX1
- US Air Force (FXGX)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKEHX
- Poland (WP01)
- Effective Date:
- 1 May 2007
- Brazil (YA01)
- Effective Date:
- 1 May 2012
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Nov 2002
- Canada (ZC01)
- Effective Date:
- 1 May 2000
- Germany (ZG01)
- Effective Date:
- 1 Jan 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Dec 1997
- Netherlands (ZN01)
- Effective Date:
- 1 Jun 2001
- Greece (ZU01)
- Effective Date:
- 1 May 2006
Approved Sources 5999-01-198-7076
- Part Number
- Manufacturer
- Status
- A55485/05-012D
- Manufacturer
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- A-55485/05-012D
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- A-A-55485/5
- 58536 - Federal Commercial Item Description (Active)
- Incomplete Standard
- Incomplete Standard
- M38527/05-012D
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A-A-55485/05
- 58536 - Federal Commercial Item Description (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-M-38527/5
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3249619
- 53711 - Naval Sea Systems Command (Active)
- Advisory Reference
- Advisory Reference
- 715851-1
- 05869 - Raytheon Company (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5999-01-198-7076
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Material [MATT]
- Plastic Diallyl Phthalate
- Mounting Facility Type And Quantity [AXHR]
- 1 Unthreaded Hole Second Mounting Facility
- Mounting Facility Type And Quantity [AXHR]
- 8 Unthreaded Hole First Mounting Facility
- Overall Height [ABKW]
- 0.178 Inches Nominal
- Overall Length [ABHP]
- 0.390 Inches Nominal
- Overall Width [ABMK]
- 0.390 Inches Nominal
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.020 Inches Minimum First Mounting Facility And 0.028 Inches Maximum First Mounting Facility
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.250 Inches Nominal Second Mounting Facility
- Specification/Standard Data [ZZZK]
- 58536-A-A-55485/5 Government Specification
- Test Data Document [TEST]
- 58536-A-A-55485 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5999-01-198-7076
DLA Procurement Analysis 5999-01-198-7076
- Last Stock Position:
- 157 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5999-01-198-7076
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5999-01-198-7076
Freight Information 5999-01-198-7076
5999-01-198-7076 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-198-7076 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-198-7076 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-198-7076 is not classified as a special type of cargo when transported by water. 5999-01-198-7076 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-198-7076
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 2.0" H x 2.0" W x 2.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 2.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-198-7076 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: