Premium Information is available for this item - Upgrade for $1 a day
5999-01-158-0072
Electrical-Electronic Component Mounting Pad
5999011580072 011580072 13142661 LT73-01 RC-CS-280075-1C
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
June 2023
4
Marketplace 5999-01-158-0072
Request a Quotation from participating marketplace vendors
Related Documents 5999-01-158-0072 5+ Documents (More...)
(Identification) 1/2 NSN 5999-01-158-0072 (Identification) 2/2 - - 1.
Every Day 5999-01-158-0072 RQST NE Updated Every Day 5999-01-158-0072 RQST Updated Every Day 5999-01
011580072,13142661,LT73-01 158-0072Electrical-Electronic Component Mounting Pad5999011580072 011580072
13142661 LT73-01 RC-CS-280075 /fsg-59/fsc-5999/us 5999-01-158-00725999011580072 011580072,13142661,LT73
13142661 LT73 -01 RC-CS-280075 MEDALS DAC A LT73-01 08748 - Eldec https//www.nsnlookup.com /fsg-51/fsc
13142661 LT73 -01 RC-CS-280075 MEDALS DAC A LT73-01 08748 - Eldec Aerospace Corp (Active) Secondary
13142661LT73 -01 RC-CS-280075 280075 158-0072Electrical-Electronic Component Mounting Pad5999011580072 011580072
13142661 LT73 -01 RC-CS-280075 MEDALS DAC A LT73-01 08748 - Eldec Aerospace Corp (Active) Secondary
LT73-01 RC-CS -280075 /fsg-59/fsc-5999/us 5999-01-158-00725999011580072 011580072,13142661,LT73-01 13142661LT73
fsc-7510/ca 7510-21-866-1068 Line Cut Screen 7510218661068 218661068,LT73 https//www.nsnlookup.com LT73-01
Restrictions 5999-01-158-0072
5999-01-158-0072 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5999-01-158-0072
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-158-0072
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BD
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- Poland (WP01)
- Effective Date:
- 1 Apr 2007
Approved Sources 5999-01-158-0072
- Part Number
- Manufacturer
- Status
- 13142661
- Manufacturer
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
- LT73-01
- 08748 - Eldec Aerospace Corp (Active)
- Secondary Buy
- Secondary Buy
- RC-CS-280075-1C
- 19080 - Robison Electronics Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5999-01-158-0072
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Accommodated Device Mounting Hole Pattern Style [CZGX]
- Two Hole - 0.200 Inch
- Accommodated Device Mounting Hole Quantity [CZGY]
- 2
- Body Style [AAQL]
- Rectangular
- Color [HUES]
- White
- Material [MATT]
- Plastic Mineral Filled
- Mounting Facility Type And Quantity [AXHR]
- 2 Unthreaded Hole Single Mounting Facility
- Overall Height [ABKW]
- 0.075 Inches Nominal
- Overall Length [ABHP]
- 0.280 Inches Nominal
- Overall Width [ABMK]
- 0.100 Inches Nominal
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.025 Inches Minimum Single Mounting Facility And 0.030 Inches Maximum Single Mounting Facility
Weapon Systems (WSDC) 5999-01-158-0072
DLA Procurement Analysis 5999-01-158-0072
Management Data 5999-01-158-0072
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5999-01-158-0072
Freight Information 5999-01-158-0072
5999-01-158-0072 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5999-01-158-0072 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5999-01-158-0072 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-158-0072 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5999-01-158-0072 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-158-0072
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-158-0072 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: