Premium Information is available for this item - Upgrade for $1 a day
5999-01-095-4615
Electrical-Electronic Component Mounting Pad
5999010954615 010954615 MIL-M-38527/8 M38527/08-074P M38527-8-74P
An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE. View more Electrical-Electronic Component Mounting Pad
June 2023
14
Marketplace 5999-01-095-4615
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5999-01-095-4615 5+ Documents (More...)
RQST NE Updated Every Day 5999-01-095-4615 RQST Updated Every Day 5999-01-095-4615 RQST NE Related
Day 5999-01-095-4615 RQST NE Related Day 5999-01-095-4615 RQST NE Related Day 5999-01-095-4615 RQST
MIL-M-38527/8 MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPONENT 59 EA NS Request Quotation Subscribe to View
M38527/08-074P MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPONENT 95 EA NS Request Quotation Subscribe to View
/8 ,MIL-M-38527/8 5999013558781013558781,MIL-M-38527/8 5999010969849010969849 https//www.nsnlookup.com
https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-095-4615 5999010954615 010954615,MIL-M-38527/8
MIL-M-38527/8 INSULATOR,WASHER 59 EA NS Request Quotation Subscribe to View Vendor Details...
MIL-M-38527/8 MIL-I-49466 An insulator that is essentially thin and MIL-M-38527/8 MOUNTING PAD,
/fsg-59/fsc-5999/us
https//www.nsnlookup.com /fsg-59/fsc-5999/us 5999-01-095-4615 5999010954615 010954615,MIL-M-38527/8
5999011739541011739541,MIL-M-38527/8 ,MIL-M-38527/8 5999013558781013558781,MIL-M-38527/8 5999010969849010969849
Restrictions 5999-01-095-4615
5999-01-095-4615 is a Electrical-Electronic Component Mounting Pad that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5999-01-095-4615
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5999-01-095-4615
- US Air Force (FXGG)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- KE
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5999-01-095-4615
- Part Number
- Manufacturer
- Status
- M38527/08-074P
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-M-38527/8
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- M38527-8-74P
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5999-01-095-4615
- Characteristic
- Specifications
- FIIG
- Specifications
- A03600
- Outside Diameter [ABKV]
- 0.500 Inches Nominal
- Inside Diameter [AARX]
- 0.196 Inches Nominal
- Material And Location [MTLC]
- Overall Plastic, Polyimide, Mil-P-46112, Type 1
- Overall Height [ABKW]
- 0.002 Inches Nominal
- Style Designator [STYL]
- Round, Flat
- Test Data Document [TEST]
- 81349-Mil-M-38527/8 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5999-01-095-4615
Management Data 5999-01-095-4615
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5999-01-095-4615
Freight Information 5999-01-095-4615
5999-01-095-4615 has freight characteristics managed by Germany.It has a National Motor Freight Classification (NMFC) of 103300. A Sub NMFC of Z. It has a NMFC Description of INSULATING MATERIAL NOI. 5999-01-095-4615 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53360 which rates the freight between FCL and LCL. 5999-01-095-4615 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5999-01-095-4615 is not classified as a special type of cargo when transported by water. 5999-01-095-4615 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5999-01-095-4615
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 5
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 100
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5999-01-095-4615 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: