5999-14-392-1849

Branchburg 6. 32039 Zeus Industrial Products Inc is an Active Manufacturer with the Cage Code 32039.
Frequently Asked Questions (FAQ) for CAGE 32039 What is CAGE Code 32039?
States.Where is CAGE Code 32039 Located?

5310-32-039-2444 5310320392444 320392444 is a nut having a flat bottom and 4 flat sides. an integral feature is incorporated for locking on the threads of a mating member. excludes nut (1), self-locking, cap.

5310-32-039-1827 5310320391827 320391827 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

9505-32-039-1904 9505320391904 320391904 is a ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. the rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. for dimensions greater than above, see bar, metal. excludes items having electrical resistivity or conductivity ratings.

4730-32-039-1938 4730320391938 320391938 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.