5999-14-281-7982

8650 1+ Documents ( More... ) https//www.nsnlookup.com /cage Alcatel Telspace (CAGE Code F6204) 5999-14-281-7982

5365-00-916-0201 5365009160201 009160201 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5365-21-910-0130 5365219100130 219100130 is an item with a cylindrical shaped body having external threads other than pipe or hose series. it is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. it may have a head and/or internal drive and may contain a bleeder hole. see also plug, protective, dust and moisture seal and cap-plug, protective, dust and moisture seal. excludes plug, tube fitting, threaded.

1095-98-910-0130 1095989100130 989100130

5305-00-910-0130 5305009100130 009100130 is an externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).