5999-12-366-2416

JavaScript in your web browser . 5820-99-642-1964Circuit Card Assembly5820996421964 996421964 CL1062 310525
$1 a day Upgrade your Account Upgrade 5315-01-200-1198Headed Straight Pin5315012001198 012001198 310525
PIN,STRAIGHT,HEADED 4 EA NS Request Quotation Subscribe to View Vendor Details... 310525 PIN 3 EA NS

5331-14-201-5057 5331142015057 142015057 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

$1 a day Upgrade your Account Upgrade 5315-01-200-1198Headed Straight Pin5315012001198 012001198 310525
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 310525
PIN,STRAIGHT,HEADED 4 EA NS Request Quotation Subscribe to View Vendor Details... 310525 PIN 3 EA NS

5365-00-802-1441 5365008021441 008021441 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.

5365-00-767-6593 5365007676593 007676593 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.