Miscellaneous Electrical and Electronic Components - Canada (CA)
Federal Supply Class (FSC): 5999
NATO Supply Classification Class (NSC): 5999
Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components
NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components
Items Managed by Canada (CA) - NCB is 20 or 21
Page 1 of 12
NSN Format for Miscellaneous Electrical and Electronic Components
Codified by Canada
| 59 | 99 | 21 | XXX | XXXX | |||
|---|---|---|---|---|---|---|---|
| Group FSG | Class | NCB | Identifier | ||||
| FSC Federal Supply Class | NIIN | ||||||
| NSN | |||||||
NATO Supply Class 5999 is a classification within NATO Supply Group 59, which is dedicated to Electrical And Electronic Equipment Components.
NATO Supply Class 5999 specifically focuses on Miscellaneous Electrical And Electronic Components. This class includes a wide range of components that are used in electrical and electronic equipment but do not fall into more specific categories within the group.
Some examples of components that fall under NATO Supply Class 5999 include:
1. Resistors: These are passive electrical components that limit the flow of electric current in a circuit.
2. Capacitors: These are devices that store electrical energy in an electric field.
3. Connectors: These are devices used to join electrical circuits together.
4. Switches: These are devices that control the flow of electric current in a circuit.
5. Relays: These are electrically operated switches that control the flow of current in one circuit by opening and closing contacts in another circuit.
6. Fuses: These are safety devices that protect electrical circuits from excessive current.
7. Circuit breakers: These are automatic switches that protect electrical circuits from overcurrent or short circuits.
8. Transformers: These are devices that transfer electrical energy between two or more circuits through electromagnetic induction.
9. Inductors: These are passive electrical components that store energy in a magnetic field.
10. Diodes: These are electronic components that allow current to flow in one direction while blocking it in the opposite direction.
These are just a few examples of the components that fall under NATO Supply Class 5999. The class encompasses a wide range of miscellaneous electrical and electronic components that are essential for the functioning of various electrical and electronic equipment.
Includes Permanent Magnets and Magnetostriction Elements; Caps, Clips, and Contacts, Electrical.
Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.
Frequently Asked Questions(FAQ) for Federal Supply Class 5999
- What is Federal Supply Class 5999?
- FSC 5999 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5999) in the USA for supply items codified in the category of Miscellaneous Electrical and Electronic Components.
- What is NATO Supply Classification Class 5999?
- NSC 5999 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5999 in the USA) for supply items codified in the category of Miscellaneous Electrical and Electronic Components.
- Which Federal Supply Group is FSC 5999 in?
- FSC 5999 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
- Which NATO Supply Classification Group is NSC 5999 in?
- NSC 5999 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.
Supply Items Included in Federal Supply Class 5999
- What is a Permanent Magnet? 50 Items
- A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
- What is an Electrical Contact? 1109 Items
- An Electrical Contact (CONTACT,ELECTRICAL) is an item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also CLIP, ELECTRICAL; CLAMP, ELECTRICAL; BRUSH, ELECTRICAL CONTACT; PLUG, TIP; and JACK, TIP.
- What is a Relay-Switch? 11 Items
- A Relay-Switch is an item having the dual function of a RELAY (as modified) and a SWITCH (as modified) assembled together on a common mounting or in a single inclosure. Contacts may be common to both relay and switch. For relay operated switches, see RELAY (as modified). Excludes CIRCUIT BREAKER and relays with protruding shafts.
- What is an Electrical Clip? 172 Items
- An Electrical Clip (CLIP,ELECTRICAL) is a clip designed to electrically connect items and components. Its primary function is to make a quick and/or temporary electrical connection. Includes alligator and crocodile test clips, battery clips, contact clips, electron tube clips, resistor clips, or the like. For electron tube grid and plate cap clips with wire leads attached, see LEAD, ELECTRICAL. Excludes CLAMP, ELECTRICAL; CLIP, SPRING TENSION; and FUSEHOLDER (as modified).
- What is an Electrical Clamp? 49 Items
- An Electrical Clamp (CLAMP,ELECTRICAL) is a clamp specifically designed to carry electric current. See also CLIP, ELECTRICAL; SPLICE, CONDUCTOR; TERMINAL, LUG; and RETAINER (as modified). Excludes BRACKET, PIPE.
- What is an Electrical Shield Plate? 39 Items
- An Electrical Shield Plate (PLATE,ELECTRICAL SHIELD) is a metallic or metallic coated item which is rigid or semirigid, flat, and generally smooth. Its thickness is small in comparison to both its length and width, and is designed to prevent or reduce stray electro-magnetic and/or electrostatic fields between components or items. It may be used as a mechanical guard. Excludes PLATE (as otherwise modified); SHIELD (as modified); and SPACER, PLATE.
- What is an Electrical Contact Assembly? 240 Items
- An Electrical Contact Assembly (CONTACT ASSEMBLY,ELECTRICAL) is two or more CONTACT, ELECTRICAL on a common mounting or mounted on each other. Excludes BRUSH SET, ELECTRICAL CONTACT; CONTACT SET (as modified); and INSERT, ELECTRICAL CONNECTOR.
- What is a Delay Line? 97 Items
- A Delay Line is an item which provides a predetermined delay to an electrical pulse, while maintaining substantially the same waveform. The delay is obtained by means of a real or artificial transmission line or equivalent device. The equivalent device may be acoustic, distributive, lumped constant, magnetic solid state, or surface acoustical wave type. See also ATTENUATOR, (as modified); TRANSFORMER, (as modified); and OSCILLATOR, PULSE DELAY.
- What is a Light-Switch? 15 Items
- A Light-Switch is an electrical device consisting of a Switch (1) and a light, not intended for illumination but present for the purpose of indication, on a common mounting, separable and capable of functioning individually; or one light and one switch fabricated as a common inseparable body incapable of functioning individually. It may include wall plate or box cover and it may be complete with a box. Excludes push, pull, push-pull, and toggle switches with a lamp mounted integrally in the actuator.
- What is a Connector-Switch? 16 Items
- A Connector-Switch is an electrical device consisting of one connector and one switch on a common mounting, seperable and capable of functioning individually or one connector and one switch fabricated as a common inseperable body, incapable of functioning individually. May include wall plate or box cover and may be complete with a box.
- What is an Electrical Cap? 57 Items
- An Electrical Cap (CAP,ELECTRICAL) is a cap for use with electronic or electrical items. Excludes BOOT, DUST AND MOISTURE SEAL; CAP, IGNITION DISTRIBUTION; and COVER, ELECTRICAL CONNECTOR.
- What is a Light-Switch Assembly? 13 Items
- A Light-Switch Assembly is an electrical device consisting of a Switch (1) and two or more lights, or two or more switches and two or more lights, mounted on a common mounting. The lights are not intended for illumination but are present for the purpose of indication. Each item may be separable and capable of functioning individually, or the items may be fabricated into a common inseparable body, incapable of functioning individually. It may include wall plate or box cover and it may be complete with box. Excludes push, pull, push-pull, and toggle switches with a lamp mounted integrally in the actuator.
- What is an Electronic Equipment Parts Kit? 12 Items
- An Electronic Equipment Parts Kit (PARTS KIT,ELECTRONIC EQUIPMENT) is do not use if a more specific item name is applicable.
- What is an Electronic Shielding Gasket? 549 Items
- An Electronic Shielding Gasket (SHIELDING GASKET,ELECTRONIC) is a shaped metallic item designed to increase the effectiveness of radio frequency/electromagnetic interference, or a nonmetallic item containing a wire mesh, metal, or other electrically conductive particles designed to provide environmental sealing and radio frequency/electromagnetic interference shielding. For bulk items see WIRE MESH, KNITTED or GASKETING MATERIAL, CONDUCTIVE.
- What is a Knitted Wire Mesh? 14 Items
- A Knitted Wire Mesh (WIRE MESH,KNITTED) is a resilient knitted mesh consisting of a multiplicity of interlacing wire loops. It is manufactured in various cross-sectional shapes and may include fins. It includes items designed for mechanical and/or electronic use. Item may contain a resilient core or be impregnated with a resilient compound, such as rubber or plastic to provide for weather sealing. For items made by weaving and/or welding wires to form meshes, see WIRE FABRIC. For items shaped from this material, see SHIELDING GASKET, ELECTRONIC. Excludes BRAID, WIRE; WIRE CORD; and WEATHER STRIP.
- What is an Electronic Equipment Air Cooler? 28 Items
- An Electronic Equipment Air Cooler (COOLER,AIR,ELECTRONIC EQUIPMENT) is an item designed to circulate cool air for the purpose of maintaining electronic equipment at a rated operating temerature level. Excludes FAN (as modified) and COOLER, FLUID, ELECTRONIC EQUIPMENT.
- What is an Electrical Contact Kit? 15 Items
- An Electrical Contact Kit (CONTACT KIT,ELECTRICAL) is a group of items consisting of all the necessary elements required to fabricate a CONTACT, ELECTRICAL.
- What is a Conductive Gasketing Material? 32 Items
- A Conductive Gasketing Material (GASKETING MATERIAL,CONDUCTIVE) is a nonmetallic material manufactured in various cross-sectional shapes, impregnated with electrically conductive particles. It is designed to provide environmental sealing and electromagnetic interference shielding to electrical and electronic equipment. For items shaped from this material, see SHIELDING GASKET, ELECTRONIC. See also WIRE MESH, KNITTED.
- What is a Ventilating Radio Frequency-Electromagnetic Interference Shielded Panel? 37 Items
- A Ventilating Radio Frequency-Electromagnetic Interference Shielded Panel (PANEL,RADIO FREQUENCY-ELECTROMAGNETIC INTERFERENCE SHIELDED,VENTILATING) is a replaceable device in panel form designed to eliminate radio frequency and electromagnetic interference from the air passing through it. The elimination of interference is accomplished by reflection and/or absorption of radiated electromagnetic energy by media constructed of electrically conductive material, in honeycomb or louvered form confined in a frame, with electrically conductive gasketing (or self-gasketing feature) to provide electrical contact with the cabinet on which it is installed or mounted. It may be used in air ventilating or heating ducts, lighting aperture and the like. It may have a filter for dust protection. It may include a drip-proof design feature. Excludes electrical filtering devices which employ capacitor, resistor and coil components to eliminate or suppress conducted electromagnetic energy. Excludes SHIELD,TEST.
- What is an Electrical Grounding Strip? 232 Items
- An Electrical Grounding Strip (STRIP,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material designed to provide a connection between the piece(s) of equipment and ground. Its primary purpose is to dissipate static charges. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and PLATE, ELECTRICAL GROUNDING.
- What is an Electronic Components Shield? 22 Items
- An Electronic Components Shield (SHIELD,ELECTRONIC COMPONENTS) is an item specifically designed to be placed around a group of components in order to prevent or reduce electromagnetic, electrostatic or radio frequency interference. It may be of various materials and of any shape except flat. For flat items, see PLATE, ELECTRICAL SHIELD. Excludes COVER (as modified), CAP (as modified, and shields designed for single components.
- What is an Electronic Components Housing? 27 Items
- An Electronic Components Housing (HOUSING,ELECTRONIC COMPONENTS) is a housing specifically designed to surround or enclose, in addition to supporting and aligning electronic components classified in more than one class. It may provide mounting facilities for external and/or internal components and may be either single or miltiple piece construction.
- What is an Electronic Equipment Accessory Kit? 14 Items
- An Electronic Equipment Accessory Kit (ACCESSORY KIT,ELECTRONIC EQUIPMENT) is an accessory kit designed to be used in conjunction with electronic end items for the purpose of enhancing or evaluating the capability of the items operation. This kit is not used to repair an item, nor does it permanently modify an item. Excludes REPAIR KIT (1), (as modified; PARTS KIT (1), ELECTRONIC EQUIPMENT; MAINTENANCE KIT (1), ELECTRONIC EQUIPMENT; ACCESSORY KIT ELECTRICAL-ELECTRONIC TEST EQUIPMENT.
- What is a Thermal Release Heater? 249 Items
- A Thermal Release Heater (HEATER,THERMAL RELEASE) is a resistive element which dissipates sufficient heat to melt the fusible material or distort the bimetallic element of an overload protective device when the temperature, as a result of an overload in an electrical circuit, reaches a predetermined value. Excludes COIL (as modified); RESISTANCE ELEMENT; RESISTOR,THERMAL; THERMAL RELEASE,CIRCUIT BREAKER; and items with integral bimetallic element, contacts, or fusible material.
- What is an Electrical-Electronic Component Heat Sink? 298 Items
- An Electrical-Electronic Component Heat Sink (HEAT SINK,ELECTRICAL-ELECTRONIC COMPONENT) is an item which is specifically designed to absorb, conduct or dissipate heat generated by an electrical and/or electronic component or an external source in order to prevent damage to the component. Do not use if a more specific name applies.
- What is an Electrical-Electronic Component Mounting Pad? 141 Items
- An Electrical-Electronic Component Mounting Pad (MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPONENT) is an item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE.
Stock Items From Supply Class 5999 Page 1 of 12
- 122654-7
- RNCC: 3 | RNVC: 2 | DAC: 5
- RT890X
- RNCC: 3 | RNVC: 2 | DAC: 4
- 111-000508
- RNCC: 5 | RNVC: 2 | DAC: 5