5998-14-366-2146

NumberManufacturerStatus23066 S3109 - Feller Asa https//www.nsnlookup.com /fsg-59/fsc-5998/fr 5998-14-366-2146
Circuit Card Assembly 5998143662146 143662146 147-5164 6105011475164 011475164 MOTOR ASSEMBLY https

6105-01-147-5164 6105011475164 011475164 MOTOR ASSEMBLY

4410-99-147-5164 4410991475164 991475164 BUZZER,PANEL

4310-25-147-5164 4310251475164 251475164 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.