What is Federal Supply Class 5998?

FSC 5998 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5998) in the USA for supply items codified in the category of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware.

What is NATO Supply Classification Class 5998?

NSC 5998 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5998 in the USA) for supply items codified in the category of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware.

Which Federal Supply Group is FSC 5998 in?

FSC 5998 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5998 in?

NSC 5998is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electronic Components Assembly?

An Electronic Components Assembly is a grouping of two or more different types of electrical/electronic components mounted on a common mounting. It may include an assembly of electrical/electronic components mounted on multiple PRINTED WIRING BOARD(S) mounted back to back, stacked, and the like. The item is generally a component of a subassembly and cannot be assigned a more definite item name. Excludes items which may be identified as a subassembly. For an assembly of electrical/electronic components mounted on a single PRINTED WIRING BOARD, see CIRCUIT CARD ASSEEMBLY. Do not use if a more specific name applies.

What is a Printed Circuit Board Holder?

A Printed Circuit Board Holder (HOLDER,PRINTED CIRCUIT BOARD) is a holder designed to accommodate and position one or more printed circuit boards. It is usually an open frame structure with printed circuit board guides mounted between parallel support bars and end supports. It is designed to be mounted in electrical cabinets, cases, drawers and racks to provide mounting facilities for printed circuit boards. See also CABINET, ELECTRICAL EQUIPMENT; CASE (as modified); DRAWER, ELECTRICAL EQUIPMENT; and RACK, ELECTRICAL EQUIPMENT.

What is a Backplane Assembly?

A Backplane Assembly is an insulating panel upon which two or more CONNECTOR, RECEPTACLE, ELECTRICAL, are mounted, and completely processed electrical conductor paths are deposited, etched, or printed in various paths. It provides or completes a circuit between two or more CIRCUIT CARD ASSEMBLY or ELECTRONIC COMPONENTS ASSEMBLY. It may be designed for panel or chassis mounting, or for insertion into a CONNECTOR, RECEPTACLE, ELECTRICAL. Includes motherboards. For items containing processed electrical conductor paths and contacts for plug-in connecting facilities, see PRINTED WIRING BOARD. See also PRINTED CIRCUIT BOARD; CIRCUIT CARD ASSEMBLY and CABLE ASSEMBLY, PRINTED, FLEXIBLE.

What is a Printed Circuit Board?

A Printed Circuit Board is a PRINTED WIRING BOARD having only printed electronic components, such as capacitors, resistors, and the like. For items having a complete individual electrical/electronic function, use applicable item name, such as AMPLIFIER (as modified); POWER SUPPLY; or the like. For items not having a complete individual electrical/electronic function, see applicable "SUBASSEMBLY" name, such as AMPLIFIER SUBASSEMBLY; POWER SUPPLY SUBASSEMBLY; or the like. For items having separately manufactured components (other than plug-in connecting facilities) and not having a more specific item name, see CIRCUIT CARD ASSEMBLY.

What is a Circuit Card Assembly?

A Circuit Card Assembly is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified); POWER SUPPLY; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY; POWER SUPPLY SUBASSEMBLY; or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR

What is a Printed Wiring Board?

A Printed Wiring Board is an insulating panel upon which completely processed electrical conductor paths are deposited, etched, or printed in various patterns to provide or complete a circuit between two or more points. It may provide contacts for plug-in connecting facilities. It may be designed for panel or chassis mounting, or for insertion into a CONNECTOR, RECEPTACLE, ELECTRICAL. For items containing printed electronic components, see PRINTED CIRCUIT BOARD. For items containing separately manufactured electronic components, see CIRCUIT CARD ASSEMBLY. For items consisting only of electrical conductor paths and two or more connectors, see BACKPLANE ASSEMBLY.

What is an Electronic Test Extender Card?

An Electronic Test Extender Card (EXTENDER CARD,ELECTRONIC TEST) is an item consisting of a hand wired or printed wiring board, with or without a retaining plate, rails, brackets, or electrical connector(s) which is designed to provide access to a circuit card assembly or electronic components assembly for testing, test point checking and troubleshooting.

Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware - Belgium (BE)

Federal Supply Class (FSC): 5998

NATO Supply Classification Class (NSC): 5998

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by Belgium (BE) - NCB is 13

Page 4 of 4

NSN Format for Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Codified by Belgium

59	98	13	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5998 belongs to NATO Supply Group 59, which is dedicated to Electrical And Electronic Equipment Components. Specifically, NATO Supply Class 5998 focuses on Electrical And Electronic Assemblies, Boards, Cards, And Associated Hardware.

This class includes various types of electrical and electronic components that are used in the assembly, construction, or repair of electrical and electronic equipment. It encompasses assemblies, boards, cards, and associated hardware such as connectors, sockets, terminals, and mounting hardware.

The components in this class are essential for the functioning of electrical and electronic equipment. They are used in a wide range of applications, including telecommunications, computer systems, control systems, and other electronic devices.

When procuring items within NATO Supply Class 5998, it is important to ensure that they meet the necessary quality and performance standards. These components should be compatible with the specific equipment they are intended for and should be sourced from reliable suppliers.

Overall, NATO Supply Class 5998 plays a crucial role in providing the necessary electrical and electronic components for the construction, maintenance, and repair of various equipment within the NATO community.

FSC 5998 Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware - Belgium (BE)

Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5998

What is Federal Supply Class 5998?: FSC 5998 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5998) in the USA for supply items codified in the category of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware.
What is NATO Supply Classification Class 5998?: NSC 5998 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5998 in the USA) for supply items codified in the category of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware.
Which Federal Supply Group is FSC 5998 in?: FSC 5998 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5998 in?: NSC 5998 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5998

What is an Electronic Components Assembly? 85 Items: An Electronic Components Assembly is a grouping of two or more different types of electrical/electronic components mounted on a common mounting. It may include an assembly of electrical/electronic components mounted on multiple PRINTED WIRING BOARD(S) mounted back to back, stacked, and the like. The item is generally a component of a subassembly and cannot be assigned a more definite item name. Excludes items which may be identified as a subassembly. For an assembly of electrical/electronic components mounted on a single PRINTED WIRING BOARD, see CIRCUIT CARD ASSEEMBLY. Do not use if a more specific name applies.
What is a Printed Circuit Board Holder? 11 Items: A Printed Circuit Board Holder (HOLDER,PRINTED CIRCUIT BOARD) is a holder designed to accommodate and position one or more printed circuit boards. It is usually an open frame structure with printed circuit board guides mounted between parallel support bars and end supports. It is designed to be mounted in electrical cabinets, cases, drawers and racks to provide mounting facilities for printed circuit boards. See also CABINET, ELECTRICAL EQUIPMENT; CASE (as modified); DRAWER, ELECTRICAL EQUIPMENT; and RACK, ELECTRICAL EQUIPMENT.
What is a Backplane Assembly? 17 Items: A Backplane Assembly is an insulating panel upon which two or more CONNECTOR, RECEPTACLE, ELECTRICAL, are mounted, and completely processed electrical conductor paths are deposited, etched, or printed in various paths. It provides or completes a circuit between two or more CIRCUIT CARD ASSEMBLY or ELECTRONIC COMPONENTS ASSEMBLY. It may be designed for panel or chassis mounting, or for insertion into a CONNECTOR, RECEPTACLE, ELECTRICAL. Includes motherboards. For items containing processed electrical conductor paths and contacts for plug-in connecting facilities, see PRINTED WIRING BOARD. See also PRINTED CIRCUIT BOARD; CIRCUIT CARD ASSEMBLY and CABLE ASSEMBLY, PRINTED, FLEXIBLE.
What is a Printed Circuit Board? 204 Items: A Printed Circuit Board is a PRINTED WIRING BOARD having only printed electronic components, such as capacitors, resistors, and the like. For items having a complete individual electrical/electronic function, use applicable item name, such as AMPLIFIER (as modified); POWER SUPPLY; or the like. For items not having a complete individual electrical/electronic function, see applicable "SUBASSEMBLY" name, such as AMPLIFIER SUBASSEMBLY; POWER SUPPLY SUBASSEMBLY; or the like. For items having separately manufactured components (other than plug-in connecting facilities) and not having a more specific item name, see CIRCUIT CARD ASSEMBLY.
What is a Circuit Card Assembly? 919 Items: A Circuit Card Assembly is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified); POWER SUPPLY; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY; POWER SUPPLY SUBASSEMBLY; or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR
What is a Printed Wiring Board? 79 Items: A Printed Wiring Board is an insulating panel upon which completely processed electrical conductor paths are deposited, etched, or printed in various patterns to provide or complete a circuit between two or more points. It may provide contacts for plug-in connecting facilities. It may be designed for panel or chassis mounting, or for insertion into a CONNECTOR, RECEPTACLE, ELECTRICAL. For items containing printed electronic components, see PRINTED CIRCUIT BOARD. For items containing separately manufactured electronic components, see CIRCUIT CARD ASSEMBLY. For items consisting only of electrical conductor paths and two or more connectors, see BACKPLANE ASSEMBLY.
What is an Electronic Test Extender Card? 20 Items: An Electronic Test Extender Card (EXTENDER CARD,ELECTRONIC TEST) is an item consisting of a hand wired or printed wiring board, with or without a retaining plate, rails, brackets, or electrical connector(s) which is designed to provide access to a circuit card assembly or electronic components assembly for testing, test point checking and troubleshooting.