5995-99-577-2961

Upgrade your Account Upgrade 1015-12-143-5530Abstandsring1015121435530 121435530 100109-3100.19 100109-3100-19
100109-3100.19 D2396 - Rheinmetall Waffe Munition Gmbh (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 100109-3100-19
D2396 - Rheinmetall Waffe Munition Gmbh (Active) Secondary Buy RNCC 5 RNVC 2 DAC 5 100109-3100-19

CAGE 8XDW4 Rochester Athletic Club, Inc. in Rochester, MN United States

a day Upgrade your Account Upgrade 5930-99-580-3913Lever Switch5930995803913 995803913 B991621SS4 3100-19
K0584 - Ministry Of Defence (Navy) (Obsolete) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 2 3100-19

1680-01-655-4116 1680016554116 016554116 is a device consisting of several pedal, control which are mechanically interconnected and/or have a common mounting. a bracket may be included. excludes conversion kit, vehicle, driving school&#59; pedal, control.

5365-01-435-6395 5365014356395 014356395 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.