5995-25-115-7282

6515-01-612-1849 6515016121849 016121849 is an item designed for stitching and thus securing tissues. it is designed of a material which cannot be dissolved and absorbed in such tissues.

3010-99-708-9984 3010997089984 997089984 is a device for connecting the ends of two shafts so that rotary motion of one shaft is transmitted to the other shaft. it is constructed to allow for slight misalignment of shafts both linear and angular.

3120-01-513-9141 3120015139141 015139141 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

3120-01-513-9131 3120015139131 015139131 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

6515-01-391-9709 6515013919709 013919709 is an item designed for stitching and thus securing tissues. it is designed of a material which cannot be dissolved and absorbed in such tissues.