5995-23-113-4001

: 2 | DAC: 5 19 Dec 1999 2540-23-113-3191 Flap 4150501RNCC: 3 | RNVC: 2 | DAC: 5 19 Dec 1999 5995-23-113-4001

5310-01-603-3505 5310016033505 016033505 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1560-99-603-3505 1560996033505 996033505 is an access cover which is an integral part of the airframe structure of an aircraft. excludes cover, access.

5995-23-114-4141 Radio Frequency Cable Assembly 53230A-02RNCC: 3 | RNVC: 2 | DAC: 3 24 Jun 2011 5995-23-113-4001

1420-00-603-3505 1420006033505 006033505