5995-22-119-8580

keyed alike and/or master keyed, see padlock set. https//www.nsnlookup.com /fsg-59/fsc-5995/dk 5995-22-119-8580
Electrical Special Purpose Cable Assembly 5995-22-119-8580 5995221198580 221198580 is a definite

3020-01-120-8096 3020011208096 011208096 is a gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. see also gear, antibacklash, spur. for bulk material, see rod, pinion.

4220-25-120-8096 4220251208096 251208096 VALVE,INTAKE

3020-15-120-8096 3020151208096 151208096 is a solid, cylindrically shaped item having a uniform cross section throughout its entire length with a 360 degree complement of straight, spur type teeth on its periphery. refers to bulk material only. for items having a bore, hub, or mounting facilities, see gear, spur.

5310-12-120-8096 5310121208096 121208096 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.