5995-12-341-7884

: 5 23 Oct 1996 5930-12-341-7416 Toggle Switch 49106-8RNCC: 3 | RNVC: 2 | DAC: 5 23 Oct 1996 5995-12-341-7884

3120-12-194-7131 3120121947131 121947131 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

9510-27-012-9283 9510270129283 270129283 is a metallic product of ferrous or nonferrous material. it is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. it may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. rectangular shape cross-sectional dimensions are limited to those established in appendix c, fiig a131. it is round to a maximum diameter of 24 inches or 610.0mm. for a rectangular shape less than 3/32 inch or 2.5mm thickness, see wire (1), nonelectrical.

5977-00-051-6065 5977000516065 000516065 is a holder designed to accommodate and position a brush against a commutator or collector ring. also includes items consisting of two or more brush holders (boxes) cast as an inseparable unit. may include facilities for applying pressure to the brush(es) and may also be furnished with the brush(es). see also holder assembly, electrical contact brush.

7050-01-556-2513 7050015562513 015562513 RACKMOUNT,APC